[FreeNX-kNX] Initial config problem - login denied

Mon Dec 15 23:17:56 UTC 2008

You should install gnome-core for a minimal desktop or
gnome-desktop-environment
for aditional programs.

On Mon, Dec 15, 2008 at 7:30 PM, Alexandre Takacs <admin at atc.ch> wrote:

>  me again…
>
>
>
> Just in case anyone has the same problem(s).
>
>
>
> Add gnome-panel to the list below and you *should* be ok…
>
>
>
> ;)
>
>
>
> alex
>
>
>
> *From:* Marcelo Boveto Shima [mailto:marceloshima at gmail.com]
> *Sent:* lundi 15 décembre 2008 13:46
> *To:* Alexandre Takacs; User Support for FreeNX Server and kNX Client
>
> *Subject:* Re: [FreeNX-kNX] Initial config problem - login denied
>
>
>
> Really... This could take too long. Install the packages: xorg and
> gnome-session
> and then you should have a working nx server. This will take some unneeded
> deps,
> but should work.
>
> Or you can use FreeNX from freenx-team PPA instead of NX Server from
> NoMachine. Then you can blame me for the missing deps, and I will fix it
> for you.
>
> Regards,
> Shima
>
> On Sun, Dec 14, 2008 at 7:33 PM, Alexandre Takacs <admin at atc.ch> wrote:
>
> Hello
>
> Many thanks for your help. I'm now getting a little bit further but still
> no
> show... :(
>
> Not sure where to look to further debug this...
>
> DEBUG: Calling handler function: 'saveAgentPid' for 'save pid and uid of
> the
> agent' event 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:09 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Handler function
> finished 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:09 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: received data in
> out
> channel from NX Node: '\n' (NXNodeExec). Stored status.
> 'Logger::statusPush'
> Dec 14 22:16:09 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: No registered
> handler function for message: '988' 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:11 sd-16733 NXNODE-3.3.0-3[2949]: ERROR: run command: process:
> 2959 finished with: 127 Logger::log nxnode 3851
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: Read 43 byte/s from
> nxssh stderr: [NX> 290 Failed read on channel descriptor^M\n]
> 'NXShell::handler_bye'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: Read 43 byte/s from
> nxssh stderr: [NX> 280 Exiting from the server side loop^M\n]
> 'NXShell::handler_bye'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: Closed nxssh
> stdout:
> nxssh is exiting ... 'NXShell::handler_bye'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: Closed nxssh
> stderr:
> nxssh is exiting ... 'NXShell::handler_bye'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: waiting process:
> with pid '2946' 'WaitProcess::waitProcess'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: waiting process:
>
> using 5s as timeout 'WaitProcess::waitProcess'
>
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: process with pid
> '2946' has exited 'WaitProcess::waitProcess'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: process exit status
> is '0' 'WaitProcess::getExitStatus'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2893]: DEBUG: nxssh finished
> 'NXShell::handler_bye'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: received data in
> out
> channel from NX Node: 'NX> 1009 Session status: terminating\n'
> (NXNodeExec).
> Stored status. 'Logger::statusPush'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Calling handler
> function: 'NXShell::nxsessionSetStatus' for message: 1009
> 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Setting status to
> 'Terminating' on session id: CDC8A7A6EAD376BE185C5BD37C3B4254
> 'NXShell::nxsessionSetStatus'
> Dec 14 22:16:14 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Handler function
> finished 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:15 sd-16733 NXNODE-3.3.0-3[2915]: Session 'unix-gnome' on port
> '1012' closed. Logger::log nxnode 6340
> Dec 14 22:16:15 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: received data in
> out
> channel from NX Node: 'NX> 710 Session status: Session on display '1012'
> finished\nNX> 1001 Bye.\n' (NXNodeExec). Stored status.
> 'Logger::statusPush'
> Dec 14 22:16:15 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: received message
> 'BYE' from NX Node (NXNodeExec). Stored status. 'Logger::statusPush'
> Dec 14 22:16:15 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: closing nxssh's in,
>
> out, err FDs (flagfinished is: 1) (NXNodeExec). Stored status.
> 'Logger::statusPush'
>
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: waiting process:
> with pid '2908' 'WaitProcess::waitProcess'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: waiting process:
>
> using 5s as timeout 'WaitProcess::waitProcess'
>
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: no process with
> pid:
> '2908' to wait 'WaitProcess::waitProcess'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Calling handler
> function: 'NXUtmp::remove' for 'disconnected from node' event
> 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: NXutmp: logging
> disabled. 'NXUtmp::remove'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: Handler function
> finished 'NXNodeExec::__onMessageRun'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: connection to NX
> Node finished correctly (NXNodeExec). Stored status. 'Logger::statusPush'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: session
> sessionId:CDC8A7A6EAD376BE185C5BD37C3B4254 finished
> 'NXShell::handler_session_start'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: SCRIPTS::
> script_before_close_session
> [CDC8A7A6EAD376BE185C5BD37C3B4254,alex,localhost,22]
> 'NXScripts::script_before_close_session'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: DEBUG: SCRIPTS::
> script_after_close_session
> [CDC8A7A6EAD376BE185C5BD37C3B4254,alex,localhost,22]
> 'NXScripts::script_after_close_session'
> Dec 14 22:16:17 sd-16733 NXSERVER-3.3.0-8[2943]: Session
> 'CDC8A7A6EAD376BE185C5BD37C3B4254' closed by user 'alex'. 'NXShell::Static'
>
>
>
>
> -----Original Message-----
> From: Lars Heiermann [mailto:darmok at junien.org]
> Sent: samedi 13 décembre 2008 22:14
> To: freenx-knx at kde.org
> Subject: Re: [FreeNX-kNX] Initial config problem - login denied
>
> Alexandre Takacs schrieb:
>
> >>> >>> Error: Aborting session with 'Could not open default font 'fixed''.
> > >
> > > I have tried to google this and I my best guess is that the problem has
> > > something to do with X11 not being installed the way it should but I
> muss
> > > admit that I have no idea how to solve this...
>
> You are missing a font, on Ubuntu installing xfonts-base should help.
>
> Regards,
>
> Lars
>
>
> ________________________________________________________________
>     Were you helped on this list with your FreeNX problem?
>    Then please write up the solution in the FreeNX Wiki/FAQ:
>
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>
>         Don't forget to check the NX Knowledge Base:
>                 http://www.nomachine.com/kb/
>
> ________________________________________________________________
>       FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>      https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
>
> ________________________________________________________________
>     Were you helped on this list with your FreeNX problem?
>    Then please write up the solution in the FreeNX Wiki/FAQ:
>
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>
>         Don't forget to check the NX Knowledge Base:
>                 http://www.nomachine.com/kb/
>
> ________________________________________________________________
>       FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>      https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
>
>
>
> ________________________________________________________________
>     Were you helped on this list with your FreeNX problem?
>    Then please write up the solution in the FreeNX Wiki/FAQ:
>
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>
>         Don't forget to check the NX Knowledge Base:
>                 http://www.nomachine.com/kb/
>
> ________________________________________________________________
>       FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>      https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20081215/cd3fd647/attachment.html>