[FreeNX-kNX] Fedora Core 6 Freenx problems

Sun Apr 29 21:22:25 UTC 2007

On Sun, Apr 29, 2007 at 03:13:55PM +0200, Thomas OZENNE wrote:
> Hi , I have read the previous post but I have been reinstalling my box
> 
> now I do yum install freenx nx --enable=atrpms

Did you also update nx from ATrpms?

I'm uploading these packages to Fedora Core, so you wont have to go
extra to ATrpms, but for now you'd need the nx and freenx packages
from there.

> from there, I have no nxserver bin in /usr/bin but in /usr/libexec/nx
> 
> I tried to add a user , and a password
> 
> but when I try to log in
> 
> NX> 203 NXSSH running with pid: 14324
> NX> 285 Enabling check on switch command
> NX> 285 Enabling skip of SSH config files
> NX> 285 Setting the preferred NX options
> NX> 200 Connected to address: 88.191.45.115 on port: 22
> NX> 202 Authenticating user: nx
> NX> 208 Using auth method: publickey
> NX> 204 Authentication failed.
> 
> 
> here is the sshd config
> 
> 
> #       $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
> 
> # This is the sshd server system-wide configuration file.  See
> # sshd_config(5) for more information.
> 
> # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
> 
> # The strategy used for options in the default sshd_config shipped with
> # OpenSSH is to specify options with their default value where
> # possible, but leave them commented.  Uncommented options change a
> # default value.
> 
> #Port 22
> #Protocol 2,1
> Protocol 2
> #AddressFamily any
> #ListenAddress 0.0.0.0
> #ListenAddress ::
> 
> # HostKey for protocol version 1
> #HostKey /etc/ssh/ssh_host_key
> # HostKeys for protocol version 2
> #HostKey /etc/ssh/ssh_host_rsa_key
> #HostKey /etc/ssh/ssh_host_dsa_key
> 
> # Lifetime and size of ephemeral version 1 server key
> #KeyRegenerationInterval 1h
> #ServerKeyBits 768
> 
> # Logging
> # obsoletes QuietMode and FascistLogging
> #SyslogFacility AUTH
> SyslogFacility DAEMON
> #LogLevel INFO
> 
> # Authentication:
> 
> #LoginGraceTime 2m
> PermitRootLogin yes
> #StrictModes yes
> #MaxAuthTries 6
> 
> #RSAAuthentication yes
> PubkeyAuthentication yes
> AuthorizedKeysFile .ssh/authorized_keys
> 
> # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
> #RhostsRSAAuthentication no
> # similar for protocol version 2
> #HostbasedAuthentication no
> # Change to yes if you don't trust ~/.ssh/known_hosts for
> # RhostsRSAAuthentication and HostbasedAuthentication
> #IgnoreUserKnownHosts no
> # Don't read the user's ~/.rhosts and ~/.shosts files
> #IgnoreRhosts yes
> 
> # To disable tunneled clear text passwords, change to no here!
> #PasswordAuthentication yes
> #PermitEmptyPasswords no
> PasswordAuthentication yes
> 
> # Change to no to disable s/key passwords
> #ChallengeResponseAuthentication yes
> ChallengeResponseAuthentication no
> 
> # Kerberos options
> #KerberosAuthentication no
> #KerberosOrLocalPasswd yes
> #KerberosTicketCleanup yes
> #KerberosGetAFSToken no
> 
> # GSSAPI options
> #GSSAPIAuthentication no
> GSSAPIAuthentication yes
> #GSSAPICleanupCredentials yes
> GSSAPICleanupCredentials yes
> 
> # Set this to 'yes' to enable PAM authentication, account processing,
> # and session processing. If this is enabled, PAM authentication will
> # be allowed through the ChallengeResponseAuthentication mechanism.
> # Depending on your PAM configuration, this may bypass the setting of
> # PasswordAuthentication, PermitEmptyPasswords, and
> # "PermitRootLogin without-password". If you just want the PAM account and
> # session checks to run without PAM authentication, then enable this but set
> # ChallengeResponseAuthentication=no
> #UsePAM no
> UsePAM yes
> 
> # Accept locale-related environment variables
> AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
> AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
> AcceptEnv LC_IDENTIFICATION LC_ALL
> #AllowTcpForwarding yes
> #GatewayPorts no
> #X11Forwarding no
> X11Forwarding yes
> #X11DisplayOffset 10
> #X11UseLocalhost yes
> #PrintMotd yes
> #PrintLastLog yes
> #TCPKeepAlive yes
> #UseLogin no
> #UsePrivilegeSeparation yes
> #PermitUserEnvironment no
> #Compression delayed
> #ClientAliveInterval 0
> #ClientAliveCountMax 3
> #ShowPatchLevel no
> #UseDNS yes
> #PidFile /var/run/sshd.pid
> #MaxStartups 10
> #PermitTunnel no
> 
> # no default banner path
> #Banner /some/path
> 
> # override default of no subsystems
> Subsystem       sftp    /usr/libexec/openssh/sftp-server
> IgnoreRhosts yes
> IgnoreUserKnownHosts no
> PrintMotd yes
> StrictModes no
> RSAAuthentication yes
> PermitEmptyPasswords no
> UsePrivilegeSeparation yes
> 
> and the passwd nx user line
> nx:x:100:100::/var/lib/nxserver/home:/usr/libeexc/nx/nxserver
> 
> 
> can you help?
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
>   http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
> 
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________

-- 
Axel.Thimm at ATrpms.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20070429/08200c65/attachment.sig>