[FreeNX-kNX] Authentication Failed! Nomachine Kb won't help!

Hristo Benev hristo.benev at waveroad.ca
Tue Aug 8 13:34:41 UTC 2006


emammendes wrote:
> Hello 
>
> I have installed nxclient, nxnode and nxserver on my linux box running 
> mandrake 10 but I couldn get any user o to logon. 
>
> I have installed and re-installed the server so many times that I have 
> already forgot when the first time was. 
>
>
> This is the error msg I got when 
>
> rpm -ivh nxserver-2.0.0-74.i386.rpm 
> Preparing...                ########################################### 
> [100%] 
>    1:nxserver               ########################################### 
> [100%] 
> NX> 700 Installing: server at: Tue Aug 08 07:16:21 2006. 
> NX> 700 Autodetected system: mandrake. 
> NX> 700 Install log is: /usr/NX/var/log/install. 
> NX> 700 WARNING: Found file: /usr/NX/etc/keys/node.localhost.id_dsa. 
> NX> 700 WARNING: Skipping generation keys for NX users authentication. 
> NX> 700 Creating configuration file: /usr/NX/etc/server.cfg. 
> NX> 723 Cannot start NX statistics: 
> NX> 709 NX statistics are disabled for this server. 
> NX> 700 WARNING: Error when trying to connect to NX server, error is: 
> NX> 700 WARNING: NX> 203 NXSSH running with pid: 3980 
> NX> 200 Connected to address: 127.0.0.1 on port: 22 
> NX> 202 Authenticating user: nx 
> NX> 208 Using auth method: publickey 
> NX> 204 Authentication failed.. 
> NX> 700 WARNING: nxsetup cannot validate the sanity of the current 
> installation: 
> NX> 700 WARNING: the current system or NX configuration could be broken. 
> NX> 700 WARNING: If difficulties arise (for example sessions cannot be 
> started), 
> NX> 700 WARNING: it is advisable that you try to uninstall the NX server and 
> the 
> NX> 700 WARNING: NX client packages then install them again. 
> NX> 700 WARNING: Search also the NoMachine Knowledge Base at the URL below: 
> NX> 700 WARNING: http://www.nomachine.com/kb 
> NX> 700 WARNING: for common errors encountered when performing a software 
> update 
> NX> 700 WARNING: and the related hints on how to solve them.. 
> NX> 700 Installation of NX server was completed with warnings. 
> NX> 700 Please review the install log '/usr/NX/var/log/install' 
> NX> 700 for further details. 
> NX> 700 Showing file '/usr/NX/share/documents/server/install-notices': 
>
> I read articles #AR10B00046, #AR11B00076 and #AR04D00382 (useless) but 
> couldn figure out what to do. 
>
> Any suggestions? 
>
> Many thanks 
>
> Ed 
>
>
> Ps. my ssh_config (ssh works just fine) 
>
>
> more /etc/ssh/ssh_config 
> #       $OpenBSD: ssh_config,v 1.16 2002/07/03 14:21:05 markus Exp $ 
>
> # This is the ssh client system-wide configuration file.  See 
> # ssh_config(5) for more information.  This file provides defaults for 
> # users, and the values can be changed in per-user configuration files 
> # or on the command line. 
>
> # Configuration data is parsed as follows: 
> #  1. command line options 
> #  2. user-specific file 
> #  3. system-wide file 
> # Any configuration value is only changed the first time it is set. 
> # Thus, host-specific definitions should be at the beginning of the 
> # configuration file, and defaults at the end. 
>
> # Site-wide defaults for various options 
>
> # Host * 
> #   ForwardAgent no 
> #   ForwardX11 no 
> #   RhostsAuthentication no 
> #   RhostsRSAAuthentication no 
> #   RSAAuthentication yes 
> #   PasswordAuthentication yes 
> #   HostbasedAuthentication no 
> #   BatchMode no 
> #   CheckHostIP yes 
> #   StrictHostKeyChecking ask 
> #   IdentityFile ~/.ssh/identity 
> #   IdentityFile ~/.ssh/id_rsa 
> #   IdentityFile ~/.ssh/id_dsa 
> #   Port 22 
> #   Protocol 2,1 
> #   Cipher 3des 
> #   Ciphers 
> aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc 
> #   EscapeChar ~ 
>
> Host * 
>   ForwardX11 yes 
>   Protocol 2,1 
>     StrictHostKeyChecking no 
>
>
> and sshd_config 
>
> #       $OpenBSD: sshd_config,v 1.59 2002/09/25 11:17:16 markus Exp $ 
>
> # This is the sshd server system-wide configuration file.  See 
> # sshd_config(5) for more information. 
>
> # This sshd was compiled with 
> PATH=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin 
>
> # The strategy used for options in the default sshd_config shipped with 
> # OpenSSH is to specify options with their default value where 
> # possible, but leave them commented.  Uncommented options change a 
> # default value. 
>
> #Port 22 
> Protocol 2 
> #ListenAddress 0.0.0.0 
> #ListenAddress :: 
>
> # HostKey for protocol version 1 
> HostKey /etc/ssh/ssh_host_key 
> # HostKeys for protocol version 2 
> HostKey /etc/ssh/ssh_host_rsa_key 
> HostKey /etc/ssh/ssh_host_dsa_key 
>
> # Lifetime and size of ephemeral version 1 server key 
> #KeyRegenerationInterval 3600 
> #ServerKeyBits 768 
>
> # Logging 
> #obsoletes QuietMode and FascistLogging 
> #SyslogFacility AUTH 
> #LogLevel INFO 
>
> # Authentication: 
>
> #LoginGraceTime 120 
> #PermitRootLogin yes 
> #StrictModes yes 
>
> #RSAAuthentication yes 
> #PubkeyAuthentication yes 
> AuthorizedKeysFile      .ssh/authorized_keys 
>
> # rhosts authentication should not be used 
> #RhostsAuthentication no 
> # Don't read the user's ~/.rhosts and ~/.shosts files 
> #IgnoreRhosts yes 
> # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts 
> #RhostsRSAAuthentication no 
> # similar for protocol version 2 
> #HostbasedAuthentication no 
> # Change to yes if you don't trust ~/.ssh/known_hosts for 
> # RhostsRSAAuthentication and HostbasedAuthentication 
> IgnoreUserKnownHosts yes 
>
> # To disable tunneled clear text passwords, change to no here! 
> PasswordAuthentication yes 
> PermitEmptyPasswords no 
>
> # Change to no to disable s/key passwords 
> #ChallengeResponseAuthentication yes 
>
> # Kerberos options 
> #KerberosAuthentication no 
> #KerberosOrLocalPasswd yes 
> #KerberosTicketCleanup yes 
>
> #AFSTokenPassing no 
>
> # Kerberos TGT Passing only works with the AFS kaserver 
> #KerberosTgtPassing no 
>
> # Set this to 'yes' to enable PAM keyboard-interactive authentication 
> # Warning: enabling this may bypass the setting of 'PasswordAuthentication' 
> #PAMAuthenticationViaKbdInt no 
>
> X11Forwarding yes 
> #X11DisplayOffset 10 
> #X11UseLocalhost yes 
> #PrintMotd yes 
> #PrintLastLog yes 
> #KeepAlive yes 
> #UseLogin no 
> UsePrivilegeSeparation yes 
> #PermitUserEnvironment no 
> #Compression yes 
>
> #MaxStartups 10 
> # no default banner path 
> #Banner /some/path 
> #VerifyReverseMapping no 
>
> # override default of no subsystems 
> Subsystem       sftp    /usr/lib/ssh/sftp-server 
> ReverseMappingCheck no 
> GatewayPorts no 
> AllowTcpForwarding yes 
> KeepAlive yes 
>
>
>
>
>   
> ------------------------------------------------------------------------
>
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
>   http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
>
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
Did you put the correct key into client?



More information about the FreeNX-kNX mailing list