move files between tags or merge tags
Frédéric Da Vitoria
davito9w at free.fr
Thu Nov 5 11:05:15 GMT 2026
On 04/11/2026 19:03, jean-daniel dodin wrote:
> Le 04/11/2026 à 18:11, Frédéric Da Vitoria a écrit :
>> I had a similar issue. My workaround : tag all wrong pictures with a
>> special tag (I use "_à_traiter", which means more or less "_should_fix"
>> ; initial underscore means this tag will be at the top of the tag list),
>> then I remove the bad tag from all pictures tagged "_à_traiter", then I
>> add the correct tag to the same pictures, then I remove the tag
>> "_à_traiter" from them.
>>
> sure, it's a way, it's that I call painfull :-)
>
> my way is (a bit) better: go to filter. Filter enough to have the two
> tags on display, then go to exifs and untag/retag accordingly. But
> changing tab on right is tedious and subject to omissions :-(
Maybe I don't understand what you are saying, but I believe you have to
repeat the untag/retag for each picture. I see 2 issues here: if you are
not careful, after untagging, you might trigger search refresh, which
would make the picture you just untagged disappear (good luck finding it
again to apply the correct tag!); and as you said, you must repeat the
operation for each image.
My method allows you to handle all the bad images at the same time, so
that the number of operations will remain the same instead of depending
on the number of images. I realise I did not explain clearly enough:
1. Create or choose a special tag to work with. This tag must have no
pictures attached.
2. Somehow tag all the wrong pictures with the special work tag. You
can do it using searches, or in the Tags view, or even by
handpicking the pictures. This could be long of course, but
whichever method you use, you will have to perform this search. The
nice thing is that once the pictures are tagged, you could wipe the
search and perform a completely different one to add other pictures
to the set.
3. In the Tags view, select the special work tag, you should get all
the wrong pictures and only those. At this step, it might be a good
idea to check that all tagged pictures belong here.
4. Select all the pictures having the special work tag
5. Remove the bad tag
6. Add the correct tag
7. Remove the special working tag from the pictures or simply delete
the tag entirely. I prefer to keep it, so that it is available when
I need it.
Before using digiKam, I used another software which allowed to add a
persistent flag to pictures. This was handy: I could flag the images
using different methods, and once I had assembled my flagged images set,
I could perform operations on all flagged images at once. The above
method transposes the same trick using a special tag instead of a flag.
Here are the previous steps using the word "flag" instead of special
work tag:
1. Create or choose a special tag to flag pictures. No pictures should
be flagged at this point.
2. Flag all the wrong pictures. You can do it using searches, or in the
Tags view, or even by handpicking the pictures. This could be long
of course, but whichever method you use, you will have to perform
this search. The nice thing is that once the pictures are flagged,
you could wipe the search and perform a completely different one to
add other pictures to the set.
3. Select the flagged pictures, you should get all the wrong pictures
and only those. At this step, it might be a good idea to check that
all flagged pictures belong here.
4. Select all the pictures having the special work tag
5. Remove the bad tag
6. Add the correct tag
7. Unflag all pictures
HTH
--
Cet e-mail a été vérifié par le logiciel antivirus d'Avast.
www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/digikam-users/attachments/20261105/d96607c1/attachment.htm>
More information about the Digikam-users
mailing list