tags not visible

[Maik Qualmann]

Then check the extended metadata settings for tags. The 
"Xmp.lr.hierarchicalSubject" entry should be at the top of the list in your 
case.

Maik

Am Sonntag, 14. Mai 2023, 10:11:23 CEST schrieb frederic chaume:
> Hi Maik
> 
> just checked that the option is set  (as in DK7.10)
> 
> frederic
> 
> Le 14/05/2023 à 10:08, Maik Qualmann a écrit :
> > If DXO uses sidecars of BASENAME.xmp format, which I suspect. The option
> > for compatible sidecar names for commercial programs must be activated
> > explicitly in the digiKam setup under metadata  sidecars.
> > 
> > Maik
> > 
> > Am Sonntag, 14. Mai 2023, 10:00:26 CEST schrieb frederic chaume:
> >> Hi Remco
> >> 
> >> I always use sidecar files for the raw files
> >> I also tried to "reread metadata from  file to database"  for the
> >> generated jpg, but no change
> >> 
> >> and this was working well in DK7.10 (without need to "reread metadata
> >> from  file to database" )
> >> 
> >> regards
> >> Frederic
> >> 
> >> Le 14/05/2023 à 09:55, Remco Viëtor a écrit :
> >>> On dimanche 14 mai 2023 09:49:55 CEST frederic chaume wrote:
> >>>> Hi all
> >>>> 
> >>>> Since I have installed DK8 I have new problem with tags set from an
> >>>> external application (DXO).
> >>>> I have reused the same configuration that was working with DK7.10,
> >>>> (reuse the same order in the tag namespace :
> >>>> (Xmp.lr.hierarchicalSubject
> >>>> , Xmp.dc.subject, Xmp.digiKam.TagsList , ...)
> >>>> and when I look at the exiv2 of the jpg generated by DXO , I can see
> >>>> the
> >>>> 
> >>>> correct tag list from the command :
> >>>>    > exiv2.exe -px P5240081_Dxo-1.jpg
> >>>> 
> >>>> ....
> >>>> Xmp.digiKam.TagsList                         XmpSeq     10
> >>>> Paysage/tempete, Best-of, images, Best-of/expos, Paysage,
> >>>> pays/Bretagne,
> >>>> pays/Bretagne/ile grande, pays,
> >>>> ...
> >>>> Xmp.dc.subject                               XmpBag     11  Best-of,
> >>>> Bretagne, Paysage, expos, , ile grande, images,  tempete
> >>>> ...
> >>>> Xmp.lr.hierarchicalSubject                   XmpBag     11  Best-of,
> >>>> Best-of|expos, , Paysage, Paysage|tempete, images, , pays|Bretagne,
> >>>> pays|Bretagne|ile grande
> >>>> 
> >>>> but when I look at the file in DK8, no tag are displayed and in the
> >>>> menu
> >>>> "metadata" on the right sidebar, the sections IPTC, XMP are empty and
> >>>> the exif section is not empty but no tags are visible
> >>>> I have checked that the tags are correctly visible in DK for the
> >>>> original Raw file
> >>>> 
> >>>> Any ideas? Did I missed something?
> >>>> PS: I'm running DK on windows
> >>> 
> >>> Do you modify the raw file with DXO, or does it generate a sidecar file?
> >>> 
> >>> If it generates a sidecar, have you tried selecting the images concerned
> >>> in
> >>> digikam and reread the metadata?
> >>> 
> >>> For the devs: does digikam read existing sidecars on importing a new
> >>> image
> >>> into its database?
> >>> 
> >>> Remco