[digiKam-users] Digikam keeps ignoring my ignored tags

Thomas D sdktda at gmail.com
Sun Aug 22 20:29:15 BST 2021 

To add to my reply: I think the key point here is: If the user has deemed a
face to belong to someone who is ignored. Then the user should have a quick
way of marking this face for as Ignored directly. The user should not have
to spend time looking at that face again.


Den søn. 22. aug. 2021 kl. 21.27 skrev Thomas D <sdktda at gmail.com>:

> I am a bit confused here.
>
> Does this mean, that if I go to some Person X and find hundreds of faces
> matched incorrectly to this person. Then I deem all these being people I
> want to ignore. Then I  have to first 1) click Minus here to unmatch them
> to Person X; this will put these faces into the Unknown virtual tag. Then I
> have to 2) go into the Unknown category and find the same hundreds of faces
> (which are not scattered all over the place) and mark them once again and
> then click Minus?
>
> Is this really the intended workflow?
>
> If it is, I think it is wasting precious user time and work here in the
> the user has to first spend time finding, deciding and marking the face
> twice.
>
> Also, I currently have around 1500 photos tagged with "Ignored". How can I
> mark all these as something I want to DK to ignore in one go? If I select
> all 1500 faces and click Minus. Then they will all go into the big bucket
> of Unknown together with almost 10,000 faces of which many are not to be
> ignored. Tagging the 1500 faces as ignored was a huge amount of work. I
> hope there is a way this is not all lost.
>
>
>
>
>
>
> Den søn. 22. aug. 2021 kl. 14.08 skrev Maik Qualmann <
> metzpinguin at gmail.com>:
>
>> Adding the virtual tag "Ignored" does nothing. To ignore a face, you have
>> to
>> click on the "-" button in the face thumbnail under "Unknown" in the
>> People
>> view.
>>
>> Maik
>>
>> Am Sonntag, 22. August 2021, 13:12:27 CEST schrieb Thomas D:
>> > For some reason Digikam seems to not honor my "ignored" tags.
>> >
>> > When I select a face that I do not care about (for example some member
>> of a
>> > crowd at a concert, etc.) then I assign it the tag "Ignored".
>> > What happens then is the the face immediately disappears from the view.
>> But
>> > the amount of items in the "Ignored" group does NOT increase.
>> >
>> > Next time I run a "Recognize faces" operation the ignored face is back
>> > again matched to some bogus person.
>> >
>> > Below is the debug output from when I am marking a single face as
>> Ignored.
>> > One thing that jumps out is that there are several "SELECT" SQL
>> statements,
>> > however, there are zero INSERT or UPDATE statements. I would expect
>> digikam
>> > to do at least some write operations to the database in order to store
>> my
>> > tag. But it does not seem to do that.
>> > Is anyone else experiencing something similar?
>> > How can I fix this?
>> > Could this in some weird way be related to my locale issues?
>> >
>> >
>> > 00000001 0.00000000 [19168] digikam.general: Check for finish:  0
>> packages,
>> > 0 infos to filter, hasFinished() true
>> > 00000002 0.10719850 [19168] digikam.general: Using  12  CPU core to run
>> > threads
>> > 00000003 0.10781470 [19168] digikam.general: Action Thread run  1  new
>> jobs
>> > 00000004 0.10841530 [19168] digikam.database: " ( (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) ) "
>> > 00000005 0.10849400 [19168] digikam.database: Search query:
>> > 00000006 0.10849400 [19168]  "SELECT DISTINCT Images.id, Images.name,
>> > Images.album,        Albums.albumRoot,        ImageInformation.rating,
>> > Images.category,        ImageInformation.format,
>> > ImageInformation.creationDate,        Images.modificationDate,
>> > Images.fileSize,        ImageInformation.width,
>> ImageInformation.height,
>> >      ImageTagProperties.value, ImageTagProperties.property,
>> > ImageTagProperties.tagid  FROM Images        INNER JOIN
>> ImageTagProperties
>> > ON ImageTagProperties.imageid=Images.id        LEFT JOIN
>> ImageInformation
>> > ON Images.id=ImageInformation.imageid        INNER JOIN Albums
>>  ON
>> > Albums.id=Images.album WHERE Images.status=1 AND (  ( (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) OR (
>> > (ImageTagProperties.tagid=? OR ImageTagProperties.tagid IN (SELECT id
>> FROM
>> > TagsTree WHERE pid=?)) AND ImageTagProperties.property=?  ) )  );"
>> > 00000007 0.10849400 [19168]  (QVariant(int, 90), QVariant(int, 90),
>> > QVariant(QString, "autodetectedPerson"), QVariant(int, 90),
>> QVariant(int,
>> > 90), QVariant(QString, "autodetectedFace"), QVariant(int, 90),
>> > QVariant(int, 90), QVariant(QString, "ignoredFace"), QVariant(int, 90),
>> > QVariant(int, 90), QVariant(QString, "tagRegion"))
>> > 00000008 0.14773540 [19168] digikam.database: Search result: 4367
>> > 00000009 0.17476331 [19168] digikam.general: Cancel Main Thread
>> > 00000010 0.18000311 [19168] digikam.general: One job is done
>> > 00000011 0.18014900 [19168] digikam.general: Cancel Main Thread
>> > 00000012 2.50488997 [19168] digikam.general: Using  12  CPU core to run
>> > threads
>> > 00000013 2.50501394 [19168] digikam.general: Using  12  CPU core to run
>> > threads
>> > 00000014 2.50549006 [19168] digikam.general: Action Thread run  1  new
>> jobs
>> > 00000015 2.50572968 [19168] digikam.general: Action Thread run  1  new
>> jobs
>> > 00000016 2.55105042 [19168] digikam.general: One job is done
>> > 00000017 2.55105996 [19168] digikam.general: Cancel Main Thread
>> > 00000018 2.62769842 [19168] digikam.general: One job is done
>> > 00000019 2.63544178 [19168] digikam.general: Cancel Main Thread
>> >
>> > Den man. 12. apr. 2021 kl. 12.05 skrev Thomas D <sdktda at gmail.com>:
>> > > Follow-up:
>> > > I just tried setting the language to Danish.
>> > > Then restart DK. Then set it back to EN_us. The tags are still named
>> with
>> > > way and Ignored images still seems to end up in Ukendt/Unknown.
>> > >
>> > > Den man. 12. apr. 2021 kl. 09.45 skrev Thomas D <sdktda at gmail.com>:
>> > >> Hello,
>> > >>
>> > >> I just noticed that when I mark a face as "Ignored", for some reason
>> it
>> > >> ends up in the "Unknown" tag.
>> > >>
>> > >> I am guessing that this might somehow be related to
>> > >> translation/localization of tag names. Is this possible?
>> > >>
>> > >> The reason I think this is that some of the built-in tag names are in
>> > >> English and others are in Danish  (my local language). But I have
>> > >> configured DK to use English UI language. This is rather strange.
>> > >>
>> > >> Below is screenshot from the People tag list. The two red circles are
>> > >> Danish words (Personer=People or Persons; and Ukendt = Unknown)
>> > >>
>> > >> [image: image.png]
>> > >>
>> > >> Is there any way to fix this?
>> > >>
>> > >> I have 1.3k in Ignored so at some point it must have worked. Maybe
>> before
>> > >> upgrade to DK 7.2?
>> > >>
>> > >> Den ons. 7. apr. 2021 kl. 10.09 skrev Thomas D <sdktda at gmail.com>:
>> > >>> Hi,
>> > >>>
>> > >>> I am still playing around with DK 7.2 image recognition. It is great
>> > >>> fun.
>> > >>> However, I do experience one really annoying problem: DK keeps
>> > >>> recognizing some random person (that I do not know) as a specific
>> person
>> > >>> that I do know and have tagged. So this random person shows up in
>> > >>> Unconfirmed suggested as the known person.
>> > >>> I then tag the random person as "Ignored" and I would then expect
>> > >>> *never* to see this particular image suggested as the known person
>> > >>> again (or any other known person for that matter).
>> > >>>
>> > >>> However, every time I rescan my collection with "Recognize faces",
>> it
>> > >>> keeps adding this random person - and the same exact image - as the
>> > >>> known
>> > >>> person.
>> > >>>
>> > >>> In fact, this problem occurs with many different persons.
>> > >>>
>> > >>> Is this a bug in DK - or am I doing something wrong? How do I
>> ignore a
>> > >>> detected face so that it will never be suggested again?
>>
>>
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/digikam-users/attachments/20210822/5c3a849d/attachment-0001.htm>

More information about the Digikam-users mailing list