[digiKam-users] Extracting thumbnails
Gilles Caulier
caulier.gilles at gmail.com
Sat May 16 15:48:59 BST 2020
Ok lets me one day, I will cross compile the tool under Linux for windows
Gilles Caulier
Le sam. 16 mai 2020 à 15:05, Wesley Smith <wss7932 at gmail.com> a écrit :
> I've tried all of the shortcuts for msvc and they all give me a similar
> result. Not sure what to do. It's frustrating being so close but, unable
> to obtain the goal.
>
> On Fri, May 15, 2020 at 11:10 AM Gilles Caulier <caulier.gilles at gmail.com>
> wrote:
>
>> This is strange. It sound like your don't use the right MSVC terminal
>> which set the PATH to compiler.
>>
>> You don't need to play with build dir. bootstrap script will do it for
>> you.
>>
>> Gilles
>>
>> Le ven. 15 mai 2020 à 09:59, Wesley Smith <wss7932 at gmail.com> a écrit :
>> >
>> > I appreciate your patience and help. Forgive me if I'm not making this
>> easy.
>> >
>> > Here is what I get using the bootstrap.bat
>> >>
>> >> **********************************************************************
>> >> ** Visual Studio 2019 Developer Command Prompt v16.5.5
>> >> ** Copyright (c) 2019 Microsoft Corporation
>> >> **********************************************************************
>> >>
>> >> C:\Program Files (x86)\Microsoft Visual Studio\2019\Community>cd
>> \Users\wss79\git\digikam-pgf-database
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>dir
>> >> Volume in drive C is Windows
>> >> Volume Serial Number is B439-C954
>> >>
>> >> Directory of C:\Users\wss79\git\digikam-pgf-database
>> >>
>> >> 05/14/2020 04:52 PM <DIR> .
>> >> 05/14/2020 04:52 PM <DIR> ..
>> >> 05/14/2020 04:49 PM <DIR> .vs
>> >> 05/14/2020 04:29 PM 264 bootstrap.bat
>> >> 05/14/2020 04:52 PM <DIR> build
>> >> 05/14/2020 07:27 AM 15,620 CMakeCache.txt
>> >> 05/14/2020 07:27 AM <DIR> CMakeFiles
>> >> 05/13/2020 09:05 AM 921 CMakeLists.txt
>> >> 05/14/2020 04:13 PM 504 CMakeSettings.json
>> >> 05/13/2020 09:05 AM 2,137 loadpgfblob.cpp
>> >> 05/14/2020 04:12 PM <DIR> out
>> >> 05/13/2020 09:05 AM <DIR> pgfutils
>> >> 5 File(s) 19,446 bytes
>> >> 7 Dir(s) 235,184,947,200 bytes free
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>rmdir build
>> >> The process cannot access the file because it is being used by another
>> process.
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>rmdir build
>> >> The process cannot access the file because it is being used by another
>> process.
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>rmdir build
>> >> The directory is not empty.
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>rmdir /s /q build
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>dir
>> >> Volume in drive C is Windows
>> >> Volume Serial Number is B439-C954
>> >>
>> >> Directory of C:\Users\wss79\git\digikam-pgf-database
>> >>
>> >> 05/14/2020 04:56 PM <DIR> .
>> >> 05/14/2020 04:56 PM <DIR> ..
>> >> 05/14/2020 04:49 PM <DIR> .vs
>> >> 05/14/2020 04:29 PM 264 bootstrap.bat
>> >> 05/14/2020 07:27 AM 15,620 CMakeCache.txt
>> >> 05/14/2020 07:27 AM <DIR> CMakeFiles
>> >> 05/13/2020 09:05 AM 921 CMakeLists.txt
>> >> 05/14/2020 04:13 PM 504 CMakeSettings.json
>> >> 05/13/2020 09:05 AM 2,137 loadpgfblob.cpp
>> >> 05/14/2020 04:12 PM <DIR> out
>> >> 05/13/2020 09:05 AM <DIR> pgfutils
>> >> 5 File(s) 19,446 bytes
>> >> 6 Dir(s) 235,184,984,064 bytes free
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>bootstrap.bat
>> >> -- The C compiler identification is unknown
>> >> -- The CXX compiler identification is unknown
>> >> CMake Error at CMakeLists.txt:7 (project):
>> >> The CMAKE_C_COMPILER:
>> >>
>> >> C:/Program Files (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe
>> >>
>> >> is not a full path to an existing compiler tool.
>> >>
>> >> To use the NMake generator with Visual C++, cmake must be run from a
>> shell
>> >> that can use the compiler cl from the command line. This
>> environment is
>> >> unable to invoke the cl compiler. To fix this problem, run cmake
>> from the
>> >> Visual Studio Command Prompt (vcvarsall.bat).
>> >>
>> >> Tell CMake where to find the compiler by setting either the
>> environment
>> >> variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full
>> path to
>> >> the compiler, or to the compiler name if it is in the PATH.
>> >>
>> >>
>> >> CMake Error at CMakeLists.txt:7 (project):
>> >> The CMAKE_CXX_COMPILER:
>> >>
>> >> C:/Program Files (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe
>> >>
>> >> is not a full path to an existing compiler tool.
>> >>
>> >> To use the NMake generator with Visual C++, cmake must be run from a
>> shell
>> >> that can use the compiler cl from the command line. This
>> environment is
>> >> unable to invoke the cl compiler. To fix this problem, run cmake
>> from the
>> >> Visual Studio Command Prompt (vcvarsall.bat).
>> >>
>> >> Tell CMake where to find the compiler by setting either the
>> environment
>> >> variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the
>> full path
>> >> to the compiler, or to the compiler name if it is in the PATH.
>> >>
>> >>
>> >> -- Configuring incomplete, errors occurred!
>> >> See also
>> "C:/Users/wss79/git/digikam-pgf-database/CMakeFiles/CMakeOutput.log".
>> >> See also
>> "C:/Users/wss79/git/digikam-pgf-database/CMakeFiles/CMakeError.log".
>> >> '-DCMAKE_BUILD_TYPE' is not recognized as an internal or external
>> command,
>> >> operable program or batch file.
>> >> '-DCMAKE_PREFIX_PATH' is not recognized as an internal or external
>> command,
>> >> operable program or batch file.
>> >> '-Wno-dev' is not recognized as an internal or external command,
>> >> operable program or batch file.
>> >> '..' is not recognized as an internal or external command,
>> >> operable program or batch file.
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>
>> >
>> >
>> > And this is what I get when trying manually:
>> >>
>> >> C:\Users\wss79\git\digikam-pgf-database>mkdir build
>> >
>> >
>> > C:\Users\wss79\git\digikam-pgf-database>copy CMakeLists.txt build
>> > 1 file(s) copied.
>> >
>> > C:\Users\wss79\git\digikam-pgf-database>cd build
>> >
>> > C:\Users\wss79\git\digikam-pgf-database\build>cmake ..
>> > -- The C compiler identification is unknown
>> > -- The CXX compiler identification is unknown
>> > CMake Error at CMakeLists.txt:7 (project):
>> > The CMAKE_C_COMPILER:
>> >
>> > C:/Program Files (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe
>> >
>> > is not a full path to an existing compiler tool.
>> >
>> > To use the NMake generator with Visual C++, cmake must be run from a
>> shell
>> > that can use the compiler cl from the command line. This environment
>> is
>> > unable to invoke the cl compiler. To fix this problem, run cmake
>> from the
>> > Visual Studio Command Prompt (vcvarsall.bat).
>> >
>> > Tell CMake where to find the compiler by setting either the
>> environment
>> > variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full
>> path to
>> > the compiler, or to the compiler name if it is in the PATH.
>> >
>> >
>> > CMake Error at CMakeLists.txt:7 (project):
>> > The CMAKE_CXX_COMPILER:
>> >
>> > C:/Program Files (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe
>> >
>> > is not a full path to an existing compiler tool.
>> >
>> > To use the NMake generator with Visual C++, cmake must be run from a
>> shell
>> > that can use the compiler cl from the command line. This environment
>> is
>> > unable to invoke the cl compiler. To fix this problem, run cmake
>> from the
>> > Visual Studio Command Prompt (vcvarsall.bat).
>> >
>> > Tell CMake where to find the compiler by setting either the
>> environment
>> > variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the
>> full path
>> > to the compiler, or to the compiler name if it is in the PATH.
>> >
>> >
>> > -- Configuring incomplete, errors occurred!
>> > See also
>> "C:/Users/wss79/git/digikam-pgf-database/CMakeFiles/CMakeOutput.log".
>> > See also
>> "C:/Users/wss79/git/digikam-pgf-database/CMakeFiles/CMakeError.log".
>> >
>> > C:\Users\wss79\git\digikam-pgf-database\build>
>> >
>> > On Thu, May 14, 2020 at 3:34 PM Gilles Caulier <
>> caulier.gilles at gmail.com> wrote:
>> >>
>> >> No i use VS community everywhere and it work like a charm...
>> >>
>> >> Let's me see the full console backtrace from the moment where you
>> >> start the terminal and the error message
>> >>
>> >> Gilles Caulier
>> >>
>> >> Le jeu. 14 mai 2020 à 21:13, Wesley Smith <wss7932 at gmail.com> a écrit
>> :
>> >> >
>> >> > Would this be a result of using VS Community 2019? I've launched
>> the prompt from VS and still get the same errors.
>> >> >
>> >> > On Thu, May 14, 2020 at 7:40 AM Gilles Caulier <
>> caulier.gilles at gmail.com> wrote:
>> >> >>
>> >> >> In fact i know well the error, as i devel with Qt in my office under
>> >> >> Windows and MSVC.
>> >> >>
>> >> >> You need to launch the MSVC terminal, not the standard Windows
>> >> >> terminal (aka "cmd").
>> >> >>
>> >> >> This MSVC terminal init a lots of variables to be able to use the
>> CLI
>> >> >> compiler from Microsoft (i hope that you install the CLI MSVC tools
>> >> >> with the Mircost compiler installer).
>> >> >>
>> >> >> You will found the MSVC terminal in Run Windows menu, MSVC section,
>> >> >> and advanced tools (or something like that). There are many version,
>> >> >> to cross compile to ARM or in 32bits. for get these ones, and take
>> the
>> >> >> native 64 bits version.
>> >> >>
>> >> >> Voilà.
>> >> >>
>> >> >> Gilles Caulier
>> >> >>
>> >> >> Le jeu. 14 mai 2020 à 14:31, Wesley Smith <wss7932 at gmail.com> a
>> écrit :
>> >> >> >
>> >> >> > Thank you for that. I did run it and ran into some issues. I
>> then ran a command prompt from within Visual Studio Community edition 2019
>> and tried again. Here is the output. It is looking for a path I'm not
>> familiar with.
>> >> >> >
>> >> >> >> C:\Users\wss79\git\digikam-pgf-database\build>cmake ..
>> >> >> >> -- The C compiler identification is MSVC 19.24.28315.0
>> >> >> >> -- The CXX compiler identification is MSVC 19.24.28315.0
>> >> >> >> -- Check for working C compiler: C:/Program Files
>> (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe
>> >> >> >> -- Check for working C compiler: C:/Program Files
>> (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe -
>> broken
>> >> >> >> CMake Error at C:/Program
>> Files/CMake/share/cmake-3.17/Modules/CMakeTestCCompiler.cmake:60 (message):
>> >> >> >> The C compiler
>> >> >> >>
>> >> >> >> "C:/Program Files (x86)/Microsoft Visual
>> Studio/2019/Community/VC/Tools/MSVC/14.24.28314/bin/Hostx86/x86/cl.exe"
>> >> >> >>
>> >> >> >> is not able to compile a simple test program.
>> >> >> >>
>> >> >> >> It fails with the following output:
>> >> >> >>
>> >> >> >> Change Dir:
>> C:/Users/wss79/git/digikam-pgf-database/CMakeFiles/CMakeTmp
>> >> >> >>
>> >> >> >> Run Build Command(s):nmake /nologo cmTC_7b893\fast &&
>> "C:\Program Files (x86)\Microsoft Visual
>> Studio\2019\Community\VC\Tools\MSVC\14.24.28314\bin\HostX86\x86\nmake.exe"
>> -f CMakeFiles\cmTC_7b893.dir\build.make /nologo -L
>> CMakeFiles\cmTC_7b893.dir\build
>> >> >> >> Building C object
>> CMakeFiles/cmTC_7b893.dir/testCCompiler.c.obj
>> >> >> >>
>> C:\PROGRA~2\MICROS~2\2019\COMMUN~1\VC\Tools\MSVC\1424~1.283\bin\Hostx86\x86\cl.exe
>> @C:\Users\wss79\AppData\Local\Temp\nmC021.tmp
>> >> >> >> testCCompiler.c
>> >> >> >> Linking C executable cmTC_7b893.exe
>> >> >> >> "C:\Program Files\CMake\bin\cmake.exe" -E vs_link_exe
>> --intdir=CMakeFiles\cmTC_7b893.dir
>> --rc=C:\PROGRA~2\WI3CF2~1\10\bin\100183~1.0\x86\rc.exe
>> --mt=C:\PROGRA~2\WI3CF2~1\10\bin\100183~1.0\x86\mt.exe --manifests --
>> C:\TDM-GCC-64\bin\ld.exe /nologo @CMakeFiles\cmTC_7b893.dir\objects1.rsp
>> @C:\Users\wss79\AppData\Local\Temp\nmC62D.tmp
>> >> >> >> LINK Pass 1: command "C:\TDM-GCC-64\bin\ld.exe /nologo
>> @CMakeFiles\cmTC_7b893.dir\objects1.rsp /out:cmTC_7b893.exe
>> /implib:cmTC_7b893.lib
>> /pdb:C:\Users\wss79\git\digikam-pgf-database\CMakeFiles\CMakeTmp\cmTC_7b893.pdb
>> /version:0.0 /machine:X86 /debug /INCREMENTAL /subsystem:console
>> kernel32.lib user32.lib gdi32.lib winspool.lib shell32.lib ole32.lib
>> oleaut32.lib uuid.lib comdlg32.lib advapi32.lib /MANIFEST
>> /MANIFESTFILE:CMakeFiles\cmTC_7b893.dir/intermediate.manifest
>> CMakeFiles\cmTC_7b893.dir/manifest.res" failed (exit code 1) with the
>> following output:
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /nologo: No such file
>> or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /out:cmTC_7b893.exe:
>> No such file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find
>> /implib:cmTC_7b893.lib: No such file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find
>> /pdb:C:\Users\wss79\git\digikam-pgf-database\CMakeFiles\CMakeTmp\cmTC_7b893.pdb:
>> Invalid argument
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /version:0.0: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /machine:X86: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /debug: No such file
>> or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /INCREMENTAL: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /subsystem:console: No
>> such file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find kernel32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find user32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find gdi32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find winspool.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find shell32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find ole32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find oleaut32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find uuid.lib: No such file
>> or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find comdlg32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find advapi32.lib: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find /MANIFEST: No such
>> file or directory
>> >> >> >> C:\TDM-GCC-64\bin\ld.exe: cannot find
>> /MANIFESTFILE:CMakeFiles\cmTC_7b893.dir/intermediate.manifest: Invalid
>> argument
>> >> >> >> CMakeFiles\cmTC_7b893.dir/manifest.res: file not recognized:
>> File format not recognized
>> >> >> >> NMAKE : fatal error U1077: '"C:\Program
>> Files\CMake\bin\cmake.exe"' : return code '0xffffffff'
>> >> >> >> Stop.
>> >> >> >> NMAKE : fatal error U1077: '"C:\Program Files
>> (x86)\Microsoft Visual
>> Studio\2019\Community\VC\Tools\MSVC\14.24.28314\bin\HostX86\x86\nmake.exe"'
>> : return code '0x2'
>> >> >> >> Stop.
>> >> >> >
>> >> >> >
>> >> >> > On Thu, May 14, 2020 at 2:35 AM Gilles Caulier <
>> caulier.gilles at gmail.com> wrote:
>> >> >> >>
>> >> >> >> Hi,
>> >> >> >>
>> >> >> >> I just add a bootstrap.bat script for Windows. Take a look, you
>> can
>> >> >> >> customize the Qt5_DIR variable, which is the root install path
>> to Qt5.
>> >> >> >>
>> >> >> >>
>> https://github.com/cgilles/digikam-pgf-database/blob/master/bootstrap.bat
>> >> >> >>
>> >> >> >> Gilles Caulier
>> >> >> >>
>> >> >> >> Le jeu. 14 mai 2020 à 04:28, Gilles Caulier <
>> caulier.gilles at gmail.com> a écrit :
>> >> >> >> >
>> >> >> >> > Le jeu. 14 mai 2020 à 02:08, Wesley Smith <wss7932 at gmail.com>
>> a écrit :
>> >> >> >> > >
>> >> >> >> > > I hate not being able to figure this out but, I have an
>> issue. I'm not at all familiar with QT. I'm using Windows 10 (latest
>> stable build) and I just installed cmake and Qt. I followed the
>> instructions but, cmake is not able to find some things. Here is the
>> output:
>> >> >> >> > >>
>> >> >> >> > >> -- Selecting Windows SDK version 10.0.18362.0 to target
>> Windows 10.0.18363.
>> >> >> >> > >> -- Could NOT find Qt5 (missing: Qt5_DIR)
>> >> >> >> > >> -- Configuring done
>> >> >> >> > >> CMake Error at CMakeLists.txt:21 (add_executable):
>> >> >> >> > >> Target "pgfdatabase" links to target "Qt5::Core" but the
>> target was not
>> >> >> >> > >> found. Perhaps a find_package() call is missing for an
>> IMPORTED target, or
>> >> >> >> > >> an ALIAS target is missing?
>> >> >> >> >
>> >> >> >> > How did you get this trace ? From a windows terminal with MSVC
>> setup ?
>> >> >> >> >
>> >> >> >> > Did you install Qtcreator ? I need to know more details about
>> the
>> >> >> >> > install from your system.
>> >> >> >> >
>> >> >> >> > Gilles Caulier
>>
> --
Send with Gmail Mobile
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/digikam-users/attachments/20200516/41816231/attachment-0001.htm>
More information about the Digikam-users
mailing list