[Digikam-users] Digikam crashes under MacOS when built using git + MacPorts

[Gilles Caulier]

Can you run digiKam under gdb, and get a backtrace of crash to investiguate ?

Gilles Caulier

2012/1/8 Phil Stanford <phil.stanford at gmail.com>:
> Hi.
> I've previously used Digikam on MacOS (10.6.8), built using MacPorts for
> both Digikam and all the dependencies.
> The MacPorts Digikam version hasn't been updated for some time (still on
> 2.1.1_1)  and I spotted the instructions for installing using git:
>
> https://projects.kde.org/projects/extragear/graphics/digikam/repository/revisions/master/entry/README.MACOSX
>
> I was hoping to install the current stable 2.5.0  version of Digikam.
>
> Before starting the process in the instructions above, I made sure that all
> the MacPorts already installed were up to date, and that I could install and
> run the current MacPorts version of DIgikam (2.1.1_1).  The only exception
> was that I activated boost-1.47 rather than 1.48 as I'd read that there had
> been some recent issues and although I'd read that these had been fixed I
> wasn't quite sure what Digikam build I would be picking up.
>
> Once I'd proved that everything worked with the updated MacPorts
> dependencies, I uninstalled digikam by doing 'port uninstall digikam'.
>
> I then followed the instructions in the link above, and everything seemed to
> work and I had no obvious errors during the build or install.
>
> I started the process above by using the suggested command 'git clone
> git://anongit.kde.org/digikam-software-compilation' , copying to a new
> directory I'd made.
>
> After the install, I ran the launchctl DBUS commands and rebooted the Mac
> (this had been necessary before when using the MacPorts version).
>
> Here, I have to confess my ignorance; I've not used 'git' before, and I was
> actually expecting the above 'git clone' command to fetch me the latest
> 'production' version,  however when I start Digikam (from  a terminal) the
> splash screen shows  2.6.0 not 2.5 so I guess I'm getting the development
> version.
>
> I can't really tell much more than that since I never get the main window
> appearing as Digikam crashes.   I will reproduce the terminal output below.
>
> I also tried 'Showfoto' - and that starts up and runs with no problems.  The
> splash screen for that also says 2.6.0, and the 'About' box gives the
> version as   6715b8ee6e5ee44bef186a1f0e39bf46a50f5681 with build date today
> and 'target: debugfull'.
>
> The fact that Showfoto runs OK suggests that probably this is an issue with
> Digikam + MacPorts, although as mentioned I've not used 'git' before so
> anything is possible .....
>
> I would be grateful to get some information -
>
> 1) Looking at the console log shown below, is there an obvious cause - (the
> 'too many open files' error seems similar to
> https://bugs.kde.org/show_bug.cgi?id=289330 but in my instance  DIgikam
> never starts correctly at all)
>
> 2) I don't really wish to be 'bleeding edge',   what should I have done to
> clone and build Digikam 2.5.0 not the development version
>
> 3) How can I clean things up from this build, and either get to the stable
> 2.5.0 version - or at the very least update to the latest development
> version - a bit of reading suggests that 'git pull' may do this?
>
> Ideally I would prefer to be able to install the latest released version of
> Digikam just by using MacPorts as I have other software installed using that
> package manager  - however unfortunately Digikam rarely gets updated on
> MacPorts so getting a working version with git too would be good.
>
> Thanks in advance for any pointers - I appreciate I'm rather ignorant of
> 'git' and how it works at the moment.
> Phil
>
> The log from running 'Digikam' follows -
> ========
>
> $ /Applications/MacPorts/KDE4/digikam.app/Contents/MacOS/digikam &
> [1] 680
> $ digikam(680)/KSharedDataCache ensureFileAllocated: This system misses
> support for posix_fallocate() -- ensure this partition has room for at least
> 10547296 bytes.
> digikam(680)/KSharedDataCache: Creating shell of a lock!
> digikam(680)/KSharedDataCache: Unable to setup shared cache lock, although
> it worked when created.
> digikam(680)/KSharedDataCache: Unable to unmap shared memory segment
> 0x11e600000
> digikam(680)/digikam (core) Digikam::AlbumWatch::connectToKDirWatch:
> KDirWatch method =  "FAM"
> digikam(680)/digikam (core) Digikam::AlbumManager::setDatabase:
> DatabaseParameters: [ Type "QSQLITE", Name "/Users/pns/Pictures/digikam4.db"
> (Thumbnails Name "/Users/pns/Pictures/thumbnails-digikam.db"); ]
> QSqlDatabasePrivate::removeDatabase: connection 'ConnectionTest' is still in
> use, all queries will cease to work.
> digikam(680)/digikam (core)
> Digikam::DatabaseConfigElementLoader::readConfig: Loading SQL code from
> config file "/opt/local/share/apps/digikam/database/dbconfig.xml"
> digikam(680)/digikam (core)
> Digikam::DatabaseConfigElementLoader::readConfig: false "1" 1 1
> digikam(680)/digikam (core) Digikam::SchemaUpdater::update: SchemaUpdater
> update
> digikam(680)/digikam (core) Digikam::SchemaUpdater::startUpdates: Have a
> database structure version  6
> digikam(680)/digikam (core) Digikam::SchemaUpdater::makeUpdates:
> makeUpdates  6  to  6
> digikam(680)/digikam (core) Digikam::AlbumRootLocation::AlbumRootLocation:
> Creating new Location  "/"  uuid  "volumeid:?path=%2FUsers%2Fpns%2FPictures"
> digikam(680)/digikam (core) Digikam::CollectionManager::updateLocations:
> location for  "/Users/pns/Pictures"  is available  true
> digikam(680)/digikam (core) Digikam::LoadingCache::setCacheSize: Allowing a
> cache size of 60 MB
> digikam(680)/digikam (core) Digikam::ThumbnailSchemaUpdater::startUpdates:
> Have a thumbnail database structure version  "2"
> digikam(680)/digikam (core)
> Digikam::ThumbnailLoadThread::initializeThumbnailDatabase: Thumbnail db
> ready for use
> digikam(680)/digikam (core) Digikam::AlbumManager::checkNepomukService:
> Nepomuk server is not reachable. Cannot start Digikam Nepomuk Service
> digikam(680)/digikam (core) Digikam::CollectionScanner::completeScan:
> Complete scan (file scanning deferred) took: 361 msecs.
> digikam(680)/digikam (core)
> Digikam::IccSettings::IccSettingsPriv::scanDirectories: ()
> digikam(680)/KSharedDataCache ensureFileAllocated: This system misses
> support for posix_fallocate() -- ensure this partition has room for at least
> 10547296 bytes.
> digikam(680)/KSharedDataCache: Creating shell of a lock!
> digikam(680)/KSharedDataCache: Unable to setup shared cache lock, although
> it worked when created.
> digikam(680)/KSharedDataCache: Unable to unmap shared memory segment
> 0x1223fb000
> digikam(680)/KGEOMAP KGeoMap::KGeoMapWidget::setBackend: "setting backend
> marble"
> digikam(680)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned
> initialize() D-Bus call failed:  "The name org.kde.kded was not provided by
> any .service files"
>
> digikam(680)/kdecore (K*TimeZone*): No time zone information obtained from
> ktimezoned
> digikam(680)/KGEOMAP KGeoMap::KGeoMapWidget::setBackend: "setting backend
> marble"
> digikam(680)/digikam (core)
> Digikam::AlbumFilterModel::setSearchTextSettings: new search text settings:
> "" : hasResult =  false , validRows =  0
> digikam(680)/digikam (core) Digikam::ThemeManager::slotChangePalette: ""
> digikam(680)/digikam (core) Digikam::ThemeManager::slotChangePalette: ""
> digikam(680)/digikam (core) Digikam::ThemeManager::slotChangePalette: ""
> digikam(680)/digikam (core) Digikam::ThemeManager::slotChangePalette: ""
> digikam(680)/KGEOMAP KGeoMap::ItemMarkerTiler::slotSourceModelReset: ----
> digikam(680)/KGEOMAP KGeoMap::ItemMarkerTiler::slotSourceModelReset: ----
> QKqueueFileSystemWatcherEngine::addPaths: open: Too many open files
> QFileSystemWatcher: failed to add paths:
> /Users/pns/Pictures/PictureProject/0029/DSC_2659.JPG
> QKqueueFileSystemWatcherEngine::addPaths: open: Too many open files
> QFileSystemWatcher: failed to add paths:
> /Users/pns/Pictures/PictureProject/0029/DSC_2660.JPG
> QKqueueFileSystemWatcherEngine::addPaths: open: Too many open files
> QFileSystemWatcher: failed to add paths:
> /Users/pns/Pictures/PictureProject/0029/DSC_2661.JPG
> QKqueueFileSystemWatcherEngine::addPaths: open: Too many open files
>
> (lots of similar lines for other image folders under my ID have been
> deleted)
>
> digikam(680)/digikam (core) Digikam::SearchTabHeader::selectedSearchChanged:
> changing to SAlbum  0x0
> digikam(680)/digikam (core) Digikam::SearchTabHeader::selectedSearchChanged:
> changing to SAlbum  0x122da1230
> digikam(680)/digikam (core) Digikam::FuzzySearchView::slotAlbumSelected:
> Selected new album 0x0
> digikam(680)/digikam (core) Digikam::FuzzySearchView::slotAlbumSelected: Not
> a haar search, returning
> digikam(680)/digikam (core) Digikam::FuzzySearchView::slotAlbumSelected:
> Selected new album 0x122db72c0
> QEventDispatcherUNIXPrivate(): Unable to create thread pipe: Too many open
> files
> QEventDispatcherUNIXPrivate(): Can not continue without a thread pipe
> QKqueueFileSystemWatcherEngine: error during kevent wait: Bad file
> descriptor
> KCrash: Application 'digikam' crashing...
> KCrash: Attempting to start
> /opt/local/lib/kde4/libexec/drkonqi.app/Contents/MacOS/drkonqi from kdeinit
> Warning: Path of socketfile exceeds UNIX_PATH_MAX.
> KCrash: Attempting to start
> /opt/local/lib/kde4/libexec/drkonqi.app/Contents/MacOS/drkonqi directly
> drkonqi(683)/KSharedDataCache ensureFileAllocated: This system misses
> support for posix_fallocate() -- ensure this partition has room for at least
> 10547296 bytes.
> drkonqi(683)/KSharedDataCache: Creating shell of a lock!
> drkonqi(683)/KSharedDataCache: Unable to setup shared cache lock, although
> it worked when created.
> drkonqi(683)/KSharedDataCache: Unable to unmap shared memory segment
> 0x118d2d000
>
> [1]+  Abort trap
> /Applications/MacPorts/KDE4/digikam.app/Contents/MacOS/digikam
>
>
>
> _______________________________________________
> Digikam-users mailing list
> Digikam-users at kde.org
> https://mail.kde.org/mailman/listinfo/digikam-users
>