preparing 6.0.0 code...
Maik Qualmann
metzpinguin at gmail.com
Thu Jan 11 19:14:17 GMT 2018
Yes, thanks, that's it...
Maik
Am Donnerstag, 11. Januar 2018, 19:44:37 CET schrieb Simon Frei:
> Ok, I found the problem: In tensor.h two serialize functions are
> commented - no idea why. When uncommented they work fine. I'll commit in
> a second.
>
> On 11/01/18 19:14, Maik Qualmann wrote:
> > Yes, here also GCC 7.2.1. At the moment I am lost here too...
> >
> > Maik
> >
> > Am Donnerstag, 11. Januar 2018, 17:29:34 CET schrieb Simon Frei:
> >> I have the same problem, the first error I get is:
> >>
> >> In file included from
> >> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarec
> >> omp /core/libs/facesengine/facedb/facedb.cpp:28:0:
> >> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarec
> >> om
> >> p/core/libs/facesengine/dnnface/nn/layers.h: In function 'void
> >> serialize(const con_<_num_filters, _nr, _nc,
> >> _stride_y, _stride_x, _padding_y, _padding_x>&, std::ostream&)':
> >> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarec
> >> omp /core/libs/facesengine/dnnface/nn/layers.h:210:39: error: no matching
> >> function for call to 'serialize(const
> >> resizable_tensor&, std::ostream&)'
> >>
> >> serialize(item.params, out);
> >>
> >> ^
> >>
> >> Then lots of candidates for serialize functions, but there is no
> >> serialize function defined for "const resizable_tensor&" as argument. So
> >> I am a bit confused why it compiles for you at all. Just in case, I am
> >> on gcc version 7.2.
> >>
> >> On 11/01/18 16:14, Gilles Caulier wrote:
> >>> Hi Maik,
> >>>
> >>> none. all compile fine here without extra package.
> >>>
> >>> Which GCC version do you use exactly ?
> >>>
> >>> Gilles
> >>>
> >>> 2018-01-11 12:41 GMT+01:00 Maik Qualmann <metzpinguin at gmail.com
> >>>
> >>> <mailto:metzpinguin at gmail.com>>:
> >>> Gilles, are any additional developer packages needed? I have many
> >>> notes here and then errors in:
> >>>
> >>>
> >>>
> >>> core/libs/facesengine/dnnface/dnn_base/serialize.h
> >>>
> >>>
> >>>
> >>> That's just a small excerpt:
> >>>
> >>>
> >>>
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h:443:21:note: candidate:
> >>> void serialize(const short u
> >>> nsigned int&, std::ostream&)
> >>>
> >>> inline void serialize (const T& item, std::ostream& out) \
> >>>
> >>> ^
> >>>
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h:504:5:note: in expansion
> >>> of
> >>> macro ‘USE_DEFAULT_INT_S
> >>> ERIALIZATION_FOR’
> >>>
> >>> USE_DEFAULT_INT_SERIALIZATION_FOR(unsigned short)
> >>> ^
> >>>
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h:443:21:note: no known
> >>> conversion for argument 1 fr
> >>> om ‘const alias_tensor’ to ‘const short unsigned int&’
> >>>
> >>> inline void serialize (const T& item, std::ostream& out) \
> >>>
> >>> In file included from
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> fa
> >>> cedb/facedb.cpp:28:0:
> >>>
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/layers.h:1162:39:error: no matching function for call to
> >>> ‘serialize(const alias_tensor
> >>> &, std::ostream&)’
> >>>
> >>> serialize(item.biases, out);
> >>>
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h:1596:54:note: template
> >>> argument deduction/substitu
> >>> tion failed:
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h: In substitution of
> >>> ‘template<class T> typename enabl
> >>> e_if<is_protocol_buffer<T> >::type serialize(const T&,
> >>> std::ostream&) [with T = alias_tensor]’:
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/layers.h:1162:39: required from here
> >>> /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/
> >>> dn
> >>> nface/nn/../matrix/../dnn_base/serialize.h:1596:54:error: no type
> >>> named ‘type’ in ‘struct enabl
> >>> e_if<is_protocol_buffer<alias_tensor, void>, void>’
> >>>
> >>>
> >>>
> >>> Maik
> >>>
> >>> Am Sonntag, 7. Januar 2018, 20:05:50 CET schrieb Gilles Caulier:
> >>> > There is nothing more in error trace, as a pure method is not
> >>>
> >>> implemented
> >>>
> >>> > in EigenFaceRecognizer ?
> >>> >
> >>> >
> >>> >
> >>> > Gilles
> >>> >
> >>> >
> >>> >
> >>> > 2018-01-07 20:02 GMT+01:00 Gilles Caulier
> >>>
> >>> <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> >>> > > Hum all compile fine here with OPenCV 3.4. Which version do
> >>>
> >>> you use ?
> >>>
> >>> > > Gilles
> >>> > >
> >>> > >
> >>> > >
> >>> > > 2018-01-07 19:55 GMT+01:00 Maik Qualmann
> >>>
> >>> <metzpinguin at gmail.com <mailto:metzpinguin at gmail.com>>:
> >>> > >> Compile error:
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> /home/maik/Devel/digikam-software-compilation/core/libs/
> >>>
> >>> facesengine/recognition-opencv-eigenfaces/facerec_eigenborrowed.cpp:
> >>> In
> >>>
> >>> > >> static member function ‘static cv::P
> >>> > >>
> >>> > >> tr<Digikam::EigenFaceRecognizer> Digikam::EigenFaceRecognizer::
> >>> > >>
> >>> > >> create(double)’:
> >>> > >>
> >>> > >> /home/maik/Devel/digikam-software-compilation/core/libs/
> >>> > >>
> >>> > >> facesengine/recognition-opencv-eigenfaces/facerec_eigenborro
> >>> > >>
> >>> > >> wed.cpp:216:70: error: invalid new-expression of
> >>> > >>
> >>> > >> abstract class type ‘Digikam::EigenFaceRecognizer’
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> EigenFaceRecognizer* const fr = new
> >>>
> >>> EigenFaceRecognizer(threshold);
> >>>
> >>> > >> ^
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> Maik
> >>> > >>
> >>> > >> Am Samstag, 6. Januar 2018, 17:53:30 CET schrieb Gilles
Caulier:
> >>> > >> > The main integration and improvements of new face recognition
> >>> > >>
> >>> > >> algorithms in
> >>> > >>
> >>> > >> > 6.0.0 branch is now complete and ready to use.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > The default algorithm is DNN (deep neural network => deep
> >>>
> >>> learning =>
> >>>
> >>> > >> IA).
> >>> > >>
> >>> > >> > In face scan dialog, in advanced tab, we have a new option
> >>>
> >>> where
> >>>
> >>> > >> > recognition algorithm can be selected.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > - lpbh : older one present on 5.x based on OpenCV (
> >>>
> >>> https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> >>> <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >>>
> >>> > >> rec_tutorial.htm
> >>> > >>
> >>> > >> > l#local-binary-patterns-histograms )
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > - fisherfaces : OpenCV based (
> >>>
> >>> https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> >>> <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >>>
> >>> > >> rec_tutorial.htm
> >>> > >>
> >>> > >> > l#fisherfaces )
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > - eigenfaces : OpenCV based (
> >>>
> >>> https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> >>> <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >>>
> >>> > >> rec_tutorial.htm
> >>> > >>
> >>> > >> > l#eigenfaces )
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > - dnn : dlib based (
> >>>
> >>> http://blog.dlib.net/2017/02/high-quality-face-recognition-w
> >>> <http://blog.dlib.net/2017/02/high-quality-face-recognition-w>
> >>>
> >>> > >> ith-deep.html)
> >>> > >>
> >>> > >> > I'm not yet satisfied by DNN. I'm not started to compare
> >>>
> >>> the algorithm
> >>>
> >>> > >> with
> >>> > >>
> >>> > >> > a clean database. In all cases, we must detect all faces,
> >>>
> >>> not tagged.
> >>>
> >>> > >> After
> >>> > >>
> >>> > >> > that, we need to train the faces with names, else the
> >>>
> >>> recognition will
> >>>
> >>> > >> not
> >>> > >>
> >>> > >> > work. As i know, at least with lpbh algorithm, we need at
> >>>
> >>> least 6
> >>>
> >>> > >> > images
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > tagged with same name to see a recognition result while
> >>>
> >>> scanning. To
> >>>
> >>> > >> have a
> >>> > >>
> >>> > >> > clean compare result, for each algorithm to use, we need a
> >>>
> >>> clear
> >>>
> >>> > >> database.
> >>> > >>
> >>> > >> > The student working on this project while summer 2017
> >>>
> >>> report to me that
> >>>
> >>> > >> in
> >>> > >>
> >>> > >> > all cases the best algorithms are :
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > 1 DNN.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > 2 eigenfaces.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > 3 fisherfaces.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > 4 lpbh.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > The goal is to use the best one at end.
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > Gilles Caulier
> >>> > >> >
> >>> > >> >
> >>> > >> >
> >>> > >> > 2018-01-04 13:18 GMT+01:00 Gilles Caulier
> >>>
> >>> <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> >>> > >> > > The 6.0.0 git branch is created in remote :
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > [gilles at localhost digikam.master]$ git branch -a
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > * master
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/HEAD -> origin/master
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/0.10
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/0.8
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/0.8.x
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/0.9.x
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/1.2
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/1.3
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/3.0.0
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/6.0.0 <
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > =============================
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/balooport
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/bug309058
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/cmakecleanup
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/externaltools
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/frameworks
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/garbagecollection
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/hupnp
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/imagemetadatacache
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/kde3
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/photolayoutseditor
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/sql2.0
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/development/usbimport
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc11-clone
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc11-presentation
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-editorcanvas
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-imgqsort
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-localadj
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-tagmngr
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-thumbbar-mv
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc13-videow
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc14-greyc
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc14-kipibqm
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc14-qaccess
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc15-advmetadata
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc15-kio-drop
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc16-mysql
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc16-red-eye
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc17-db-sep
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc17-dlna
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc17-face-mngmnt
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/gsoc17-healing
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > remotes/origin/master
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > This one is based on gsoc17-face-mngmnt sync with master
> >>>
> >>> today
> >>>
> >>> > >> morning.
> >>> > >>
> >>> > >> > > The remotes/origin/development/6.0.0 must be used to put
> >>>
> >>> next 6.0.0
> >>>
> >>> > >> new
> >>> > >>
> >>> > >> > > code and must be sync with master until 5.x serie will be
> >>>
> >>> completed.
> >>>
> >>> > >> > > Best
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > Gilles Caulier
> >>> > >> > >
> >>> > >> > >
> >>> > >> > >
> >>> > >> > > 2018-01-04 12:24 GMT+01:00 Gilles Caulier
> >>>
> >>> <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> >>> > >> > >> The branch gsoc17-face-mngmnt is now sync with master
> >>>
> >>> and compile
> >>>
> >>> > >> > >> and
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >> link properly.
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >> I will create a new 6.0.0 branch based on the
> >>>
> >>> gsoc17-face-mngmnt
> >>>
> >>> > >> branch
> >>> > >>
> >>> > >> > >> for future main development.
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >> Gilles Caulier
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >>
> >>> > >> > >> 2018-01-03 19:57 GMT+01:00 Maik Qualmann
> >>>
> >>> <metzpinguin at gmail.com <mailto:metzpinguin at gmail.com>>:
> >>> > >> > >>> Gilles, and everyone else a Happy New Year. Yes, I'm
> >>>
> >>> looking
> >>>
> >>> > >> forward to
> >>> > >>
> >>> > >> > >>> feedback on MySQL - but only positive. ((:-)) No,
> >>>
> >>> seriously, I know
> >>>
> >>> > >> that
> >>> > >>
> >>> > >> > >>> there
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> will be problems. Currently I only use MySQL for
> >>>
> >>> testing and it is
> >>>
> >>> > >> > >>> running
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> really well here. It is important that we write in the
> >>>
> >>> release note
> >>>
> >>> > >> that
> >>> > >>
> >>> > >> > >>> the
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> core DB with the migration tool should be copied into a
> >>>
> >>> new DB and
> >>>
> >>> > >> > >>> should be
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> started with a new created thumbnail and face DB.
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> Maik
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>>
> >>> > >> > >>> Am Mittwoch, 3. Januar 2018, 18:10:50 CET schrieb
> >>>
> >>> Gilles Caulier:
> >>> > >> > >>> > Hi all,
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > In first, i hope an happy new year to all.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > 1/ I currently revival the face management git branch
> >>>
> >>> written
> >>>
> >>> > >> while
> >>> > >>
> >>> > >> > >>> summer
> >>> > >> > >>>
> >>> > >> > >>> > 2017 by the student working on AI engine to recognize
> >>>
> >>> faces. The
> >>>
> >>> > >> code
> >>> > >>
> >>> > >> > >>> is
> >>> > >> > >>>
> >>> > >> > >>> > sync with master, but do not compile yet. I will fix
> >>> > >> > >>> > it.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > 2/ Important point : this code do not compile with
> >>>
> >>> OpenCV 2.x. It
> >>>
> >>> > >> > >>> require
> >>> > >> > >>>
> >>> > >> > >>> > OpenCV 3.1. This want mean that digiKam 6.0.0 will
> >>>
> >>> drop OpenCV
> >>>
> >>> > >> > >>> > 2.x
> >>> > >> > >>>
> >>> > >> > >>> support
> >>> > >> > >>>
> >>> > >> > >>> > definitively.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > 3/ when faces management branch will be fixed, I
> >>>
> >>> would to create
> >>>
> >>> > >> a new
> >>> > >>
> >>> > >> > >>> one
> >>> > >> > >>>
> >>> > >> > >>> > dedicated to 6.0.0 release and let's master for the
> >>>
> >>> 5.x series,
> >>>
> >>> > >> > >>> > as
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > certainly a new 5.9.0 will be published few weeks ago
> >>>
> >>> 5.8.0, as
> >>>
> >>> > >> > >>> > maintenance, until 6.0.0 code will be stabilized.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > 4/ The clone tool : this one still not very unusable
> >>>
> >>> for 5.8.0. I
> >>>
> >>> > >> > >>> recommend
> >>> > >> > >>>
> >>> > >> > >>> > to disable this option in editor for the moment,
> >>>
> >>> until zoom
> >>>
> >>> > >> support
> >>> > >>
> >>> > >> > >>> > and
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > brushes size preview over canvas is not implemented.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > 5/ I do know yet when 5.8.0 will be released, as i
> >>>
> >>> don't receive
> >>>
> >>> > >> a new
> >>> > >>
> >>> > >> > >>> > response from Nicolas to create the whole tarball.
> >>>
> >>> Also Maik,
> >>>
> >>> > >> > >>> > want
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > certainly receive more feedback about Mysql support
> >>>
> >>> as i can see
> >>>
> >>> > >> > >>> recently
> >>> > >> > >>>
> >>> > >> > >>> > in bugzilla.
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > Best
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> >
> >>> > >> > >>> > Gilles Caulier
> >>> > >>
> >>> > >> --
> >>> > >>
> >>> > >>
> >>> > >>
> >>> > >> Gruß Maik
More information about the Digikam-devel
mailing list