preparing 6.0.0 code...
Maik Qualmann
metzpinguin at gmail.com
Thu Jan 11 18:14:44 GMT 2018
Yes, here also GCC 7.2.1. At the moment I am lost here too...
Maik
Am Donnerstag, 11. Januar 2018, 17:29:34 CET schrieb Simon Frei:
> I have the same problem, the first error I get is:
>
> In file included from
> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarecomp
> /core/libs/facesengine/facedb/facedb.cpp:28:0:
> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarecom
> p/core/libs/facesengine/dnnface/nn/layers.h: In function 'void
> serialize(const con_<_num_filters, _nr, _nc,
> _stride_y, _stride_x, _padding_y, _padding_x>&, std::ostream&)':
> /media/nunkystorage/4_Simon/Programme/Linux/source/digikam/develsoftwarecomp
> /core/libs/facesengine/dnnface/nn/layers.h:210:39: error: no matching
> function for call to 'serialize(const
> resizable_tensor&, std::ostream&)'
> serialize(item.params, out);
> ^
> Then lots of candidates for serialize functions, but there is no
> serialize function defined for "const resizable_tensor&" as argument. So
> I am a bit confused why it compiles for you at all. Just in case, I am
> on gcc version 7.2.
>
> On 11/01/18 16:14, Gilles Caulier wrote:
> > Hi Maik,
> >
> > none. all compile fine here without extra package.
> >
> > Which GCC version do you use exactly ?
> >
> > Gilles
> >
> > 2018-01-11 12:41 GMT+01:00 Maik Qualmann <metzpinguin at gmail.com
> >
> > <mailto:metzpinguin at gmail.com>>:
> > Gilles, are any additional developer packages needed? I have many
> > notes here and then errors in:
> >
> >
> >
> > core/libs/facesengine/dnnface/dnn_base/serialize.h
> >
> >
> >
> > That's just a small excerpt:
> >
> >
> >
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h:443:21:note: candidate:
> > void serialize(const short u
> > nsigned int&, std::ostream&)
> > inline void serialize (const T& item, std::ostream& out) \
> > ^
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h:504:5:note: in expansion of
> > macro ‘USE_DEFAULT_INT_S
> > ERIALIZATION_FOR’
> > USE_DEFAULT_INT_SERIALIZATION_FOR(unsigned short)
> > ^
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h:443:21:note: no known
> > conversion for argument 1 fr
> > om ‘const alias_tensor’ to ‘const short unsigned int&’
> > inline void serialize (const T& item, std::ostream& out) \
> >
> > In file included from
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/fa
> > cedb/facedb.cpp:28:0:
> >
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/layers.h:1162:39:error: no matching function for call to
> > ‘serialize(const alias_tensor
> > &, std::ostream&)’
> > serialize(item.biases, out);
> >
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h:1596:54:note: template
> > argument deduction/substitu
> > tion failed:
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h: In substitution of
> > ‘template<class T> typename enabl
> > e_if<is_protocol_buffer<T> >::type serialize(const T&,
> > std::ostream&) [with T = alias_tensor]’:
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/layers.h:1162:39: required from here
> > /home/maik/Devel/digikam-software-compilation/core/libs/facesengine/dn
> > nface/nn/../matrix/../dnn_base/serialize.h:1596:54:error: no type
> > named ‘type’ in ‘struct enabl
> > e_if<is_protocol_buffer<alias_tensor, void>, void>’
> >
> >
> >
> > Maik
> >
> > Am Sonntag, 7. Januar 2018, 20:05:50 CET schrieb Gilles Caulier:
> > > There is nothing more in error trace, as a pure method is not
> >
> > implemented
> >
> > > in EigenFaceRecognizer ?
> > >
> > >
> > >
> > > Gilles
> > >
> > >
> > >
> > > 2018-01-07 20:02 GMT+01:00 Gilles Caulier
> >
> > <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> > > > Hum all compile fine here with OPenCV 3.4. Which version do
> >
> > you use ?
> >
> > > > Gilles
> > > >
> > > >
> > > >
> > > > 2018-01-07 19:55 GMT+01:00 Maik Qualmann
> >
> > <metzpinguin at gmail.com <mailto:metzpinguin at gmail.com>>:
> > > >> Compile error:
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> /home/maik/Devel/digikam-software-compilation/core/libs/
> >
> > facesengine/recognition-opencv-eigenfaces/facerec_eigenborrowed.cpp:
> > In
> >
> > > >> static member function ‘static cv::P
> > > >>
> > > >> tr<Digikam::EigenFaceRecognizer> Digikam::EigenFaceRecognizer::
> > > >>
> > > >> create(double)’:
> > > >>
> > > >> /home/maik/Devel/digikam-software-compilation/core/libs/
> > > >>
> > > >> facesengine/recognition-opencv-eigenfaces/facerec_eigenborro
> > > >>
> > > >> wed.cpp:216:70: error: invalid new-expression of
> > > >>
> > > >> abstract class type ‘Digikam::EigenFaceRecognizer’
> > > >>
> > > >>
> > > >>
> > > >> EigenFaceRecognizer* const fr = new
> >
> > EigenFaceRecognizer(threshold);
> >
> > > >> ^
> > > >>
> > > >>
> > > >>
> > > >> Maik
> > > >>
> > > >> Am Samstag, 6. Januar 2018, 17:53:30 CET schrieb Gilles Caulier:
> > > >> > The main integration and improvements of new face recognition
> > > >>
> > > >> algorithms in
> > > >>
> > > >> > 6.0.0 branch is now complete and ready to use.
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > The default algorithm is DNN (deep neural network => deep
> >
> > learning =>
> >
> > > >> IA).
> > > >>
> > > >> > In face scan dialog, in advanced tab, we have a new option
> >
> > where
> >
> > > >> > recognition algorithm can be selected.
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > - lpbh : older one present on 5.x based on OpenCV (
> >
> > https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> > <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >
> > > >> rec_tutorial.htm
> > > >>
> > > >> > l#local-binary-patterns-histograms )
> > > >> >
> > > >> >
> > > >> >
> > > >> > - fisherfaces : OpenCV based (
> >
> > https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> > <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >
> > > >> rec_tutorial.htm
> > > >>
> > > >> > l#fisherfaces )
> > > >> >
> > > >> >
> > > >> >
> > > >> > - eigenfaces : OpenCV based (
> >
> > https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face
> > <https://docs.opencv.org/2.4/modules/contrib/doc/facerec/face>
> >
> > > >> rec_tutorial.htm
> > > >>
> > > >> > l#eigenfaces )
> > > >> >
> > > >> >
> > > >> >
> > > >> > - dnn : dlib based (
> >
> > http://blog.dlib.net/2017/02/high-quality-face-recognition-w
> > <http://blog.dlib.net/2017/02/high-quality-face-recognition-w>
> >
> > > >> ith-deep.html)
> > > >>
> > > >> > I'm not yet satisfied by DNN. I'm not started to compare
> >
> > the algorithm
> >
> > > >> with
> > > >>
> > > >> > a clean database. In all cases, we must detect all faces,
> >
> > not tagged.
> >
> > > >> After
> > > >>
> > > >> > that, we need to train the faces with names, else the
> >
> > recognition will
> >
> > > >> not
> > > >>
> > > >> > work. As i know, at least with lpbh algorithm, we need at
> >
> > least 6
> >
> > > >> > images
> > > >> >
> > > >> >
> > > >> >
> > > >> > tagged with same name to see a recognition result while
> >
> > scanning. To
> >
> > > >> have a
> > > >>
> > > >> > clean compare result, for each algorithm to use, we need a
> >
> > clear
> >
> > > >> database.
> > > >>
> > > >> > The student working on this project while summer 2017
> >
> > report to me that
> >
> > > >> in
> > > >>
> > > >> > all cases the best algorithms are :
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > 1 DNN.
> > > >> >
> > > >> >
> > > >> >
> > > >> > 2 eigenfaces.
> > > >> >
> > > >> >
> > > >> >
> > > >> > 3 fisherfaces.
> > > >> >
> > > >> >
> > > >> >
> > > >> > 4 lpbh.
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > The goal is to use the best one at end.
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > Gilles Caulier
> > > >> >
> > > >> >
> > > >> >
> > > >> > 2018-01-04 13:18 GMT+01:00 Gilles Caulier
> >
> > <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> > > >> > > The 6.0.0 git branch is created in remote :
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > [gilles at localhost digikam.master]$ git branch -a
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > * master
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/HEAD -> origin/master
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/0.10
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/0.8
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/0.8.x
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/0.9.x
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/1.2
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/1.3
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/3.0.0
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/6.0.0 <
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > =============================
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/balooport
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/bug309058
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/cmakecleanup
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/externaltools
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/frameworks
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/garbagecollection
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/hupnp
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/imagemetadatacache
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/kde3
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/photolayoutseditor
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/sql2.0
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/development/usbimport
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc11-clone
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc11-presentation
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-editorcanvas
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-imgqsort
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-localadj
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-tagmngr
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-thumbbar-mv
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc13-videow
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc14-greyc
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc14-kipibqm
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc14-qaccess
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc15-advmetadata
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc15-kio-drop
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc16-mysql
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc16-red-eye
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc17-db-sep
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc17-dlna
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc17-face-mngmnt
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/gsoc17-healing
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > remotes/origin/master
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > This one is based on gsoc17-face-mngmnt sync with master
> >
> > today
> >
> > > >> morning.
> > > >>
> > > >> > > The remotes/origin/development/6.0.0 must be used to put
> >
> > next 6.0.0
> >
> > > >> new
> > > >>
> > > >> > > code and must be sync with master until 5.x serie will be
> >
> > completed.
> >
> > > >> > > Best
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > Gilles Caulier
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > 2018-01-04 12:24 GMT+01:00 Gilles Caulier
> >
> > <caulier.gilles at gmail.com <mailto:caulier.gilles at gmail.com>>:
> > > >> > >> The branch gsoc17-face-mngmnt is now sync with master
> >
> > and compile
> >
> > > >> > >> and
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >> link properly.
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >> I will create a new 6.0.0 branch based on the
> >
> > gsoc17-face-mngmnt
> >
> > > >> branch
> > > >>
> > > >> > >> for future main development.
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >> Gilles Caulier
> > > >> > >>
> > > >> > >>
> > > >> > >>
> > > >> > >> 2018-01-03 19:57 GMT+01:00 Maik Qualmann
> >
> > <metzpinguin at gmail.com <mailto:metzpinguin at gmail.com>>:
> > > >> > >>> Gilles, and everyone else a Happy New Year. Yes, I'm
> >
> > looking
> >
> > > >> forward to
> > > >>
> > > >> > >>> feedback on MySQL - but only positive. ((:-)) No,
> >
> > seriously, I know
> >
> > > >> that
> > > >>
> > > >> > >>> there
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> will be problems. Currently I only use MySQL for
> >
> > testing and it is
> >
> > > >> > >>> running
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> really well here. It is important that we write in the
> >
> > release note
> >
> > > >> that
> > > >>
> > > >> > >>> the
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> core DB with the migration tool should be copied into a
> >
> > new DB and
> >
> > > >> > >>> should be
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> started with a new created thumbnail and face DB.
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> Maik
> > > >> > >>>
> > > >> > >>>
> > > >> > >>>
> > > >> > >>> Am Mittwoch, 3. Januar 2018, 18:10:50 CET schrieb
> >
> > Gilles Caulier:
> > > >> > >>> > Hi all,
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > In first, i hope an happy new year to all.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > 1/ I currently revival the face management git branch
> >
> > written
> >
> > > >> while
> > > >>
> > > >> > >>> summer
> > > >> > >>>
> > > >> > >>> > 2017 by the student working on AI engine to recognize
> >
> > faces. The
> >
> > > >> code
> > > >>
> > > >> > >>> is
> > > >> > >>>
> > > >> > >>> > sync with master, but do not compile yet. I will fix it.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > 2/ Important point : this code do not compile with
> >
> > OpenCV 2.x. It
> >
> > > >> > >>> require
> > > >> > >>>
> > > >> > >>> > OpenCV 3.1. This want mean that digiKam 6.0.0 will
> >
> > drop OpenCV
> >
> > > >> > >>> > 2.x
> > > >> > >>>
> > > >> > >>> support
> > > >> > >>>
> > > >> > >>> > definitively.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > 3/ when faces management branch will be fixed, I
> >
> > would to create
> >
> > > >> a new
> > > >>
> > > >> > >>> one
> > > >> > >>>
> > > >> > >>> > dedicated to 6.0.0 release and let's master for the
> >
> > 5.x series,
> >
> > > >> > >>> > as
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > certainly a new 5.9.0 will be published few weeks ago
> >
> > 5.8.0, as
> >
> > > >> > >>> > maintenance, until 6.0.0 code will be stabilized.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > 4/ The clone tool : this one still not very unusable
> >
> > for 5.8.0. I
> >
> > > >> > >>> recommend
> > > >> > >>>
> > > >> > >>> > to disable this option in editor for the moment,
> >
> > until zoom
> >
> > > >> support
> > > >>
> > > >> > >>> > and
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > brushes size preview over canvas is not implemented.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > 5/ I do know yet when 5.8.0 will be released, as i
> >
> > don't receive
> >
> > > >> a new
> > > >>
> > > >> > >>> > response from Nicolas to create the whole tarball.
> >
> > Also Maik,
> >
> > > >> > >>> > want
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > certainly receive more feedback about Mysql support
> >
> > as i can see
> >
> > > >> > >>> recently
> > > >> > >>>
> > > >> > >>> > in bugzilla.
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > Best
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> >
> > > >> > >>> > Gilles Caulier
> > > >>
> > > >> --
> > > >>
> > > >>
> > > >>
> > > >> Gruß Maik
More information about the Digikam-devel
mailing list