[Digikam-devel] Typo corrections

linux newbie firsttimelinux at yahoo.com
Sat Feb 18 18:48:47 CET 2006


 > No, in a diff/patch there is context, in your sed
 > script not.
True.

I followed the svn instructions at
http://www.digikam.org/?q=download/svn and got
digikam, digikamimageplugins, kde-common/admin and
extragear/libs.  After 30M of download, I didn't get
any .po files!!

That means if I provide a diff, the po files won't be
altered - presumably this would give problems as it
wouldn't be able to find the entries in the po
files???

I checked the cpp files and note that MHunter has
already spotted and corrected some of the mistakes
last week!  That will teach me a lesson!  But there
are still some revealed by the sed script, and I
attach a diff -ur output below.  Hope this helps!
Note that without the po files (and with some fixes
already made) this diff output is a lot more
manageable in size - earlier this text file was almost
400K, which was why I wanted to send a script instead!

------

diff -ur
latest/graphics/digikam/digikam/imagepropertieshistogram.cpp
latmod/graphics/digikam/digikam/imagepropertieshistogram.cpp
---
latest/graphics/digikam/digikam/imagepropertieshistogram.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/digikam/imagepropertieshistogram.cpp
2006-02-18 18:36:14.000000000 +0100
@@ -81,7 +81,7 @@
                                        "<b>Green</b>:
drawing the green image channel values.<p>"
                                        "<b>Blue</b>:
drawing the blue image channel values.<p>"
                                        "<b>Alpha</b>:
drawing the alpha image channel values. " 
-                                       "This channel
corresponding to the transparency value and "
+                                       "This channel
corresponds to the transparency value and "
                                        "is supported
by some image formats such as PNG or GIF.<p>"
                                       
"<b>Colors</b>: drawing all color channels values at
the same time."));
     
diff -ur
latest/graphics/digikam/imageplugins/imageeffect_autocorrection.cpp
latmod/graphics/digikam/imageplugins/imageeffect_autocorrection.cpp
---
latest/graphics/digikam/imageplugins/imageeffect_autocorrection.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/imageplugins/imageeffect_autocorrection.cpp
2006-02-18 18:36:13.000000000 +0100
@@ -78,8 +78,8 @@
     m_typeCB->setCurrentText( i18n("Auto Levels") );
     QWhatsThis::add( m_typeCB, i18n("<p>Select here
the auto-color correction tool to use:<p>"
                                     "<b>Auto
Levels</b>: This option maximizes the tonal range in
the Red, "
-                                    "Green, and Blue
channels. It search the image shadow and highlight "
-                                    "limit values and
adjust the Red, Green, and Blue channels "
+                                    "Green, and Blue
channels. It searches the image shadow and highlight "
+                                    "limit values and
adjusts the Red, Green, and Blue channels "
                                     "to a full
histogram range.<p>"
                                    
"<b>Normalize</b>: this option scales brightness
values across the active "
                                     "image so that
the darkest point becomes black, and the "
diff -ur
latest/graphics/digikam/imageplugins/imageeffect_bwsepia.cpp
latmod/graphics/digikam/imageplugins/imageeffect_bwsepia.cpp
---
latest/graphics/digikam/imageplugins/imageeffect_bwsepia.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/imageplugins/imageeffect_bwsepia.cpp
2006-02-18 18:36:13.000000000 +0100
@@ -63,7 +63,7 @@
    
frame->setFrameStyle(QFrame::Panel|QFrame::Sunken);
     QVBoxLayout* l = new QVBoxLayout(frame, 5, 0);
     m_previewWidget = new Digikam::ImageWidget(480,
320, frame);
-    QWhatsThis::add( m_previewWidget, i18n("<p>This
is the black and White conversion tool preview"));
+    QWhatsThis::add( m_previewWidget, i18n("<p>This
is the black and white conversion tool preview"));
     l->addWidget(m_previewWidget, 0);
     topLayout->addWidget(frame);
 
@@ -86,10 +86,10 @@
     QWhatsThis::add( m_typeCB, i18n("<p>Select here
the black and white conversion type:<p>"
                                     "<b>Neutral</b>:
simulate black and white neutral film exposure.<p>"
                                     "<b>Green
Filter</b>: simulate black and white film exposure
using green filter. "
-                                    "This provides an
universal asset for all scenics, especially suited for
portraits "
+                                    "This provides a
universal asset for all scenics, especially suited for
portraits "
                                     "photographed
against sky.<p>"
                                     "<b>Orange
Filter</b>: simulate black and white film exposure
using orange filter. "
-                                    "This will
enhances landscapes, marine scenes and aerial
photography.<p>"
+                                    "This will
enhance landscapes, marine scenes and aerial
photography.<p>"
                                     "<b>Red
Filter</b>: simulate black and white film exposure
using red filter. "
                                     "Using this one
creates dramatic sky effects and simulates moonlight
scenes in daytime.<p>"
                                     "<b>Yellow
Filter</b>: simulate black and white film exposure
using yellow filter. "
@@ -100,9 +100,9 @@
                                     "<b>Brown
Tone</b>: more neutral than Sepia Tone filter.<p>"
                                     "<b>Cold
Tone</b>: start subtle and replicate printing on a
cold tone black and white "
                                     "paper such as a
bromide enlarging paper.<p>"
-                                    "<b>Selenium
Tone</b>: effect that replicate traditional selenium
chemical toning done "
+                                    "<b>Selenium
Tone</b>: effect that replicates traditional selenium
chemical toning done "
                                     "in the
darkroom.<p>"
-                                    "<b>Platinum
Tone</b>: effect that replicate traditional platinum
chemical toning done "
+                                    "<b>Platinum
Tone</b>: effect that replicates traditional platinum
chemical toning done "
                                     "in the
darkroom."
                                     ));
 
diff -ur
latest/graphics/digikam/imageplugins/imageeffect_ratiocrop.cpp
latmod/graphics/digikam/imageplugins/imageeffect_ratiocrop.cpp
---
latest/graphics/digikam/imageplugins/imageeffect_ratiocrop.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/imageplugins/imageeffect_ratiocrop.cpp
2006-02-18 18:36:13.000000000 +0100
@@ -99,7 +99,7 @@
     m_ratioCB->insertItem( i18n("None") );
     m_ratioCB->setCurrentText( "1:1" );
     QWhatsThis::add( m_ratioCB, i18n("<p>Select here
your constrained aspect ratio for cropping. "
-                                     "The Golden
Ratio 1:1.618. A composition following this rule "
+                                     "The Golden
Ratio is 1:1.618. A composition following this rule "
                                      "is considered
visually harmonious"));
 
     m_orientLabel = new QLabel(i18n("Orientation:"),
cropSelection);
diff -ur
latest/graphics/digikam/kioslave/digikamsearch.cpp
latmod/graphics/digikam/kioslave/digikamsearch.cpp
--- latest/graphics/digikam/kioslave/digikamsearch.cpp
2006-02-18 18:34:38.000000000 +0100
+++ latmod/graphics/digikam/kioslave/digikamsearch.cpp
2006-02-18 18:36:15.000000000 +0100
@@ -617,7 +617,7 @@
         // ok. its an int, does it look like a year?
         if (1970 <= num && num <=
QDate::currentDate().year())
         {
-            // very sure its a year
+            // very sure it's a year
             return QString("%1-%-%").arg(num);
         }
     }
diff -ur
latest/graphics/digikam/showfoto/imagepropertieshistogram.cpp
latmod/graphics/digikam/showfoto/imagepropertieshistogram.cpp
---
latest/graphics/digikam/showfoto/imagepropertieshistogram.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/showfoto/imagepropertieshistogram.cpp
2006-02-18 18:36:14.000000000 +0100
@@ -81,7 +81,7 @@
                                        "<b>Green</b>:
drawing the green image channel values.<p>"
                                        "<b>Blue</b>:
drawing the blue image channel values.<p>"
                                        "<b>Alpha</b>:
drawing the alpha image channel values. " 
-                                       "This channel
corresponding to the transparency value and "
+                                       "This channel
corresponds to the transparency value and "
                                        "is supported
by some image formats such as PNG or GIF.<p>"
                                       
"<b>Colors</b>: drawing all color channels values at
the same time."));
     
diff -ur
latest/graphics/digikam/showfoto/setupslideshow.cpp
latmod/graphics/digikam/showfoto/setupslideshow.cpp
---
latest/graphics/digikam/showfoto/setupslideshow.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/showfoto/setupslideshow.cpp
2006-02-18 18:36:14.000000000 +0100
@@ -56,7 +56,7 @@
    QWhatsThis::add( m_loopMode, i18n("<p>Slideshow
running in loop with all current images."));
    
    m_fullScreenMode = new QCheckBox(i18n("Fullscreen
mode"), parent);
-   QWhatsThis::add( m_fullScreenMode, i18n("<p>Toogle
in fullScreen mode during Slideshow."));
+   QWhatsThis::add( m_fullScreenMode, i18n("<p>Toggle
in fullScreen mode during Slideshow."));
 
    layout->addWidget( m_delayInput );
    layout->addWidget( m_startWithCurrent );
diff -ur
latest/graphics/digikam/utilities/cameragui/cameraui.cpp
latmod/graphics/digikam/utilities/cameragui/cameraui.cpp
---
latest/graphics/digikam/utilities/cameragui/cameraui.cpp
2006-02-18 18:34:38.000000000 +0100
+++
latmod/graphics/digikam/utilities/cameragui/cameraui.cpp
2006-02-18 18:36:15.000000000 +0100
@@ -336,7 +336,7 @@
     {
       if (KMessageBox::warningYesNo(this,
                                     i18n("Failed to
connect to camera. "
-                                         "Please make
sure its connected "
+                                         "Please make
sure it's connected "
                                          "properly
and turned on. "
                                          "Would you
like to try again?"), 
                                     i18n("Connection
Failed"),


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the Digikam-devel mailing list