<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-2">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2><IMG alt="shepherd" hspace=0
src="http://cdoral.com/blot.gif" align=baseline
border=0></FONT></DIV>
<DIV><FONT face=Arial size=2>Test mode means that installer does not save
configuration in the permanent memory, as before.</FONT></DIV>
<DIV><FONT face=Arial size=2>This fix adds check in the GUI to not let the user
enter port ranges like that.</FONT></DIV>
<DIV><FONT face=Arial size=2>No manual editing of the config is required prior
to import. This operation also helps identify changes made to objects in two copies
of the same data file.</FONT></DIV>
<DIV><FONT face=Arial size=2>In the process of this operation user is presented
with series of dialogs showing conflicting objects side by side.</FONT></DIV>
<DIV><FONT face=Arial size=2>installOptionsDialog was too large and did not fit
on some laptop screens. Also, you can explicitly put interface objects into policy
rules and specify direction if you want to do this manually.</FONT></DIV>
<DIV><FONT face=Arial size=2>The GUI includes built-in installer for routers
which works just like installer for PIX. The GUI got confused when user enter full
path to the policy file in the "Output file name" input field in the "Compiler" tab
of firewall object dialog.</FONT></DIV>
<DIV><FONT face=Arial size=2>This should be useful when you have routers with
many interfaces and only want to add ACLs to some of them. These links point
directly to the web interface to the CVS reposirory on SourceForge, these are the
latest files that have been checked in. Packets that originate on the firewall
should be marked in the OUTPUT chain. I do not know this myself and rely on
translators for the localization to be done right.</FONT></DIV>
<DIV><FONT face=Arial size=2>I do not know this myself and rely on translators
for the localization to be done right.</FONT></DIV>
<DIV><FONT face=Arial size=2>Packets that originate on the firewall should be
marked in the OUTPUT chain. Two data files can not be merged, or one imported into
another, if they contain such objects.</FONT></DIV>
<DIV><FONT face=Arial size=2>Summary page shown in the end reflects this as
failed install.</FONT></DIV>
<DIV><FONT face=Arial size=2>Compiler can also add commands to configure
logging.</FONT></DIV>
<DIV><FONT face=Arial size=2>Both installers were updated however to improve
support for the automatic roll-back feature in case you lose connect with the
firewall or the router because of an error in the policy. This should be useful when
you have routers with many interfaces and only want to add ACLs to some of them.
Both installers were updated however to improve support for the automatic roll-back
feature in case you lose connect with the firewall or the router because of an error
in the policy. Compiler can also add commands to configure logging. I can not help
you or verify your work. Compiler can also add commands to configure logging.
Installer incorrectly set name for files it copied to the firewall if generated
configuration consisted of several files. I can't help it if this happens, except to
remove the translation from the package. Since router ACLs have no state, all rules
should be created in the policy pretty much like you do it on the router, including
rules that permit reply packets. Two data files can not be merged, or one imported
into another, if they contain such objects. This turns Firewall Builder into
universal access policy management tool for a data center, office or an ISP.
Built-in installer detects error messages printed by iptables and iptables-restore
and aborts installation process. Currently only Cisco IOS access lists can be
imported but I plan to add import for other platforms as well.</FONT></DIV>
<DIV><FONT face=Arial size=2>Importer can properly interpret both
formats.</FONT></DIV>
<DIV><FONT face=Arial size=2>Importer creates firewall object with all
interfaces firewall object name is assigned if "hostname" command is found in the
configuration. Currently opened data file is not affected by this operation and
objects in the tree do not change. The tab widget used to show policy, nat, routing
and policy branch rulesets does not switch to a "folded" mode on Mac OS X when it
needs to show more tabs that fit in the window.</FONT></DIV>
<DIV><FONT face=Arial size=2>Both installers were updated however to improve
support for the automatic roll-back feature in case you lose connect with the
firewall or the router because of an error in the policy. Now you can make installer
schedule reboot in a few minutes, then upload new policy or ACLs and then cancel
reboot if upload was successful.</FONT></DIV></BODY></HTML>