[FreeNX-kNX] screen resolution and colour depth

Jeremy Wilkins wjeremy at shaw.ca
Mon Nov 9 23:55:13 UTC 2009


Thinclients can sometimes have a limited colour depth, so that might be
normal unless it didn't do that before.  I would suggest that the thinclient
is likely the problem and needs its resolution changed since it seems
everything else is working.  As for the small text etc, that is a known
issue and can be overcome by forcing the dpi setting of the fonts to 96 or
120 in the appearance section of your desktop environment and all menus can
be resized (I know it can in kde4 at least).  Also, vesa does not always
support 1280x1024 mode as far as I know so that is why that didn't work.  If
you know the type of video card that you have, you might be better off using
it in your xorg.conf file.


olaf staubus wrote:
> 
> Hi !
> 
> Someone had installed opensuse + freeNX on my server, but he has not
> finished the configuration.
> 
> Now I'm having trouble with the resolution of the screen and the colour
> depth:
> 
> Colour depth:
> - starting a session with pxe-boot (ThinStation, nomachine-client) on a
> thinClient (Igel 364LX) shows wrong colour depth.
> - starting a session from a "real" computer (suse 11.1 with installed
> nomachine-client) shows the colours correct.
> 
> 
> Screen resolution:
> - starting a session from a "real" computer (suse 11.1 with installed
> nomachine-client, everything (buttons, signs, kde-menu a.s.o.) looks very
> small on my 1280x1024 screen.
> 
> The screen was set to vesa 1024x768 in kde-menu -> SaX2 in the session, so
> I tried to change it to 1280x1024, but the "test" response/break with the
> message
> "Fehler beim Testen der Konfiguration"
> and the var/log/xorg.99.log tells at the bottom
> 
> ######
> (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
> (==) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent
> (--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector DVI-D
> 1
> (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
> (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output
> UNIPHY_KLDSKP_LVTMA
> (II) RADEONHD(0): Output VGA_1 using monitor section Monitor[0]
> (**) RADEONHD(0): Option "PreferredMode" "1280x1024"
> (II) RADEONHD(0): Output DVI-D_1 has no monitor section
> (II) RADEONHD(0): Output VGA_1 disconnected
> (II) RADEONHD(0): Output DVI-D_1 disconnected
> (WW) RADEONHD(0): No outputs definitely connected, trying again...
> (II) RADEONHD(0): Output VGA_1 disconnected
> (II) RADEONHD(0): Output DVI-D_1 disconnected
> (WW) RADEONHD(0): Unable to find initial modes
> (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support.
> (EE) RADEONHD(0): Failed to detect a connected monitor
> (II) RADEONHD(0): Destroying DAC A
> (II) RADEONHD(0): Destroying UNIPHY_KLDSKP_LVTMA
> (II) RADEONHD(0): I2C bus "RHD I2C line 0" removed.
> (II) RADEONHD(0): I2C bus "RHD I2C line 1" removed.
> (II) RADEONHD(0): I2C bus "RHD I2C line 2" removed.
> (II) RADEONHD(0): I2C bus "RHD I2C line 3" removed.
> (II) UnloadModule: "radeonhd"
> (EE) Screen(s) found, but none have a usable configuration.
> 
> Fatal server error:
> no screens found
> #####
> 
> Anyone can help me, please ?
> 
> bye
> Olaf
> 
> -- 
> GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
> Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
> 
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>   
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
> 
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
> 
> 

-- 
View this message in context: http://old.nabble.com/screen-resolution-and-colour-depth-tp26268373p26275986.html
Sent from the freenx-knx mailing list archive at Nabble.com.




More information about the FreeNX-kNX mailing list