[FreeNX-kNX] Previous error "xrdb: Can't open display ':1000'" returns

[Urs Beyerle]

Hi Freek,

I tested "my" FreeNX, NX packages on openSUSE 11.1 x86_64 LiveCD (running from LiveCD, not
installed). And it's working. What I did:

Boot openSUSE 11.1 x86_64 LiveCD. Create a local user for NX login, and install FreeNX and NX as root.

# su -
# /etc/init.d/sshd start
# zypper ar http://download.opensuse.org/repositories/home://beyerle://NX/openSUSE_11.1/home:beyerle:NX.repo
# zypper mr -e -a
# zypper install FreeNX
# rpm -qa | grep NX
NX-3.2.0-45.1
FreeNX-0.7.3-4.1
# nxsetup --install --setup-nomachine-key --clean
# nxserver --status
NX> 100 NXSERVER - Version 3.2.0-73 OS (GPL, using backend: not detected)
NX> 110 NX Server is running

First test, if you can connect as local user with ssh and afterwards connect with nxclient. I used nxclient
(nxclient-3.3.0-3) from nomachine.

Hope this helps.

Cheers,

	Urs



Freek de Kruijf wrote:
>> Hi,
>>
>> Are you using the freenx and NX RPMs from my repo
>> http://download.opensuse.org/repositories/home://beyerle://NX/openSUSE_11.1
>> / ?
>>
>> I use these RPMs on opensuse i386 and KDE 3.x. No problem so far.
>>
>> Can you check if you have some old lock files for display :1000 and
>> remove them
>>
>> /tmp/.X1000-lock
>> /tmp/.nX1000
>> /tmp/.X11-unix/X1000
>>
>> I will see if I can test the RPMs on a KDE4/x86_64 system.
>>
>> Cheers,
>>
>>     Urs
> 
> Hi Urs,
> 
> I used the one above as also others. All with the same result.
> BTW. I used the latest openSUSE 11.1 LiveCD with KDE4.2 in the installation.
> 
>> Freek de Kruijf wrote:
>>> Hi,
>>>
>>> I installed all kinds of flavors of FreeNX from the openSUSE Build
>>> Service in a recently installed openSUSE 11.1/KDE42 environment.
>>> Currently I am using FreeNX 0.7.3-4.1 x86_64
>>>
>>> I always get in the session log:
>>>
>>> xrdb: No such file or directory
>>> xrdb: Can't open display ':1000'
>>> $DISPLAY is not set or cannot connect to the X server.
>>>
>>> I searched for solutions, but none of these are of any help.
>>>
>>> I am using nxclient-3.3.0-6.x86_64.rpm on the client side.