<div dir="ltr">Hi all,<div><br></div>I am an enthusiastic digikam user for nearly 20 years now! <div><br></div><div>I am running 8.0.0. on an I7 under Linux with plenty of RAM (<a href="https://www.intel.com/content/www/us/en/products/sku/205608/intel-nuc-11-pro-mini-pc-nuc11tnkv7/specifications.html">https://www.intel.com/content/www/us/en/products/sku/205608/intel-nuc-11-pro-mini-pc-nuc11tnkv7/specifications.html</a>). My picture collection became huge, about 8TB (also many RAW files, roughly 300.000 Jpegs), and I still use SQLLite for the database. </div><div><br></div><div>In general everything works fine but when I switch to another picture this takes up to 3 seconds. This is very anyoing especially when sorting out pictures. For the latter purpose I store incoming pictues on the internal SSD but this leads exactly to the 3 seconds from above, external USB-drive is worse but not as worse as I would expect. I tried to precache all pictures into RAM, that did not significantly help. When I lower the maximal CPU frequency this seems to scale linearly with the time to show a new picture.</div><div><br></div><div>Over the years my pictures became larger and larger. Today I have Jpegs around 20MB. (5MB Pics from my IPhone show up very fast.)</div><div><br></div><div>I wonder whether someone can give a hint where I might have an issue with my system. Is SQLLite a problem in my setting? Or are the 3 seconds just my fate because of the many megapixel...</div><div><br></div><div>Best wishes & tnx</div><div><br></div><div>Tonio</div></div>